2 Lan Tunnels---Same 192.168.1.0 255.255.255.0 network

[g8orade]

Hi,
Just wondering if 2 lans same internal remote address would work? Or do I have to convince someone to change their address scheme.
g8orade

 

[NetworkGhost]

You can do it but you would have to nat on both ends.

Free Firewall/Network/Systems Support-

http://firewalls.ath.cx

 

[g8orade]

I am still unsure how to accomplish this. I already have 1 lan to lan tunnel where they are using 192.168.1.1 and am looking at setting up another tunnel with another network that are using the same 192.168.1.1 scheme. Just not sure how to accomplish this.
G8orade

 

[NetworkGhost]

What device is on the other end of the VPN?

Free Firewall/Network/Systems Support-

http://firewalls.ath.cx

 

[g8orade]

On the other end is a cisco pix 501. I am not sure which version of firmware they are running though. Thanks for the response.
G8orade.