2 IP Phones using same DID

[kellygirl01]

Hello, Just wondering if it is possible to have two IP phones that use the same extension.

I'm using a Nortel BCM 400, one phone is a Nortel IP2002 and the other is a wireless IP phone.

I want both phones to ring with the same number, right not they have the same number and using 2 DID's

 

[FletcherP]

Assign same Target line to @ phone.

 

[kellygirl01]

That's it? And they'll both share the same number?

 

[kellygirl01]

Ok, They both share the same line and when i dial the full number like someone would do externally the both ring.

They won't both ring if i dial the extension internally.

What am i missing?

 

[TLDuk]

you need to put both phones in a hunt group and assign the target line to the hunt group then the hunt group number will ring both IP phones as well as the DID

 

[kellygirl01]

So, both phones will use the same target line and then i place them in a hunt group?

I know this sounds stupid, but i'm just starting to learn about telephony.
What's the purpose of a huntgroup?


Bit confused, could someone give me a brief step by step on how to do this?
Would really appreciate any help in this learning process.

 

[cook1082]

The easiest thing to do is put an answer DN on the phone you assign the line to.