Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2 CallerID Questions

Status
Not open for further replies.

NonaSuomy

Technical User
Sep 20, 2010
23
CA
Is there a way to get the phone to display the callerID for all key lines going to the phone alls I get is the CID for key 0, do you have to enter a special code when you setup the new key to make CID show up as well on that key?

Also is there a reason why an extension would only show the 4 digit extension without the persons name?
 
cls marks control that.. if all lines should show clid to the network... if you want to display the clid of key 0 when call external on key 1, the key 1 scr 2134 d, shows the clid of key 0

john poole
bellsouth business
columbia,sc
 
Do you have multiple DNs on your phone and you want to see the caller ID information coming in on all of these DNs?

If so, try adding a Display key to the phone.
This way if any line rings, press DISPLAY and you'll see the incoming caller's information before answering.
 
Or add CLS TDD. question 2 - is there a name programmed for the DN? does set have CLS CNDA?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top