1760 DRAM upgrade causing to boot in ROMMON

[knoorda]

Currently have a 1760 with 16 Flash / 32 DRAM. I am upgrading with a 32 Flash stick and a 64 DRAM stick. I added the flash no problem, but when I put in the 64 DRAM stick it boots to rommon. I try to xmodem from ROMMON for an IOS, that works, completes, then goes back into ROMMON. Any ideas?
Thanks in advance,

 

[JOAMON]

The first thing you need to do is issue the dir flash: command for each available device, and look for a valid Cisco IOS® Software image.

rommon 3 > dir flash:
File size Checksum File name
3307884 bytes (0x804b4c) 0x6ba0 c1700-ny-mz.121-6.bin
rommon 4 > Try to boot from that image. If the image is valid, this brings you back to normal operation mode:

rommon 5 >
boot flash:c1700-ny-mz.121-6.bin
program load complete, entry point: 0x80008000, size: 0x804a30
Self decompressing the image : ###################################
########...

 

[JOAMON]

If that does not work take a look at the following link for tftp from rommon mode....much quicker.

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a008007cd0e.html

 

[knoorda]

Thanks for the help. I am good to go.