1602 boot error

[reaven]

hey i got this error on my 1602 when the router boot (is the 7th line), someone knows what this really means and/or how to fix it??




System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1997 by cisco Systems, Inc.
C1600 processor with 2048 Kbytes of main memory

program load complete, entry point: 0x4018060, size: 0x1e1568


%SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be correctly understood.

program load complete, entry point: 0x8000060, size: 0x32f2d8



Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph

 

[ShaunG]

Did you change the IOS recently?

Try doing a write mem and see if it goes away.

 

[reaven]

NOP THE ROUTER CAME THAT WAY WHEN I BOUGHT IT !

 

[reaven]

the write mem doesnt work neither!!

 

[Packetmaster]

This message:
%SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be correctly understood

This is a warning that a previous IOS revision config may contain syntax that is no longer valid or understood in the new release of IOS.

You should rebuild the config from scratch one or two lines are present but not used in new release that are creating this message.

 

[JKIM7]

Looks like you imported configuration file that was created using old IOS.