12x0 Trunk Module Card 1 not equipped

[icstech]

I have a modular system with a T1 card in slot 1 and trunk card in slot 2. A 12x0 trunk module is is installed on port 8 (two combo fiber cards). Here is the problem, on the 12x0, card 1 is showing unequipped, I have tried disable and enable the card and module with no luck.
The lines in question are 61 to 64 all other lines work.

Is there something I am missing, I have also replaced the 12x0 module

Thanks for your help

 

[icstech]

Ok here is another update
Changed the fibre cable with no luck
Backed up the system and did a startup and reset the memory
Reloaded the system configuration and still having the same problem
Card 1 on the trunk module (port8) stays "unequipped"

I am starting to think that you can not put a trunk card in that slot when you have a T1 card?????

Ready to give up