Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

11C power card

Status
Not open for further replies.

Wooliepride

Programmer
Jun 5, 2014
27
US
Is there any way to identify the part # of the power card in 11C?
Have tried inv generate/ inv prt in LD 117 with no results.
Any one know of another way to get this info?
Thank you
 
power supply for cabinet opt 11 are ntdk70 , and 78 which could be changed out. the chassis or rack mount for cs1000m or e the power supply build in and not suppose to be field replaceable. I don't think their is any way from inventory you will know unless you get some one at site to take a picture of the unit
 
You might also have a Option 11c mini chassis that uses an inbuilt power unit. That power unit is the same one as is installed in the later Succession 4 slot ones.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Thanks.
We sent out 2-DK70BB's (they are labeled BB) and the customer is stating they are DK70AA's.
I have no idea how to find this out or how the customer knows, thus this post.
 
They could have been aa's updated to bb and the stickers came of or someone peeled with back to find aa under. what is the problem both type's should cause no problem has longer as they are good.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top