Feb 12, 2014 #1 nuevodia Technical User Feb 27, 2004 57 0 0 US I just upload and activated a FW on the SS for IP phones. After rebooting phones they just register without upgrading, Any ideas??
I just upload and activated a FW on the SS for IP phones. After rebooting phones they just register without upgrading, Any ideas??
Feb 12, 2014 #2 KCFLHRC Technical User Aug 16, 2011 6,082 0 0 US Did you use 0625C8Q.bin ?? Upvote 0 Downvote
Feb 12, 2014 Thread starter #3 nuevodia Technical User Feb 27, 2004 57 0 0 US Yes. Why? Upvote 0 Downvote
Feb 12, 2014 #4 KCFLHRC Technical User Aug 16, 2011 6,082 0 0 US Just curious is all Upvote 0 Downvote
Feb 12, 2014 #7 KCFLHRC Technical User Aug 16, 2011 6,082 0 0 US Isn't there a signal server command to force this? Cant remember for sure. Upvote 0 Downvote
Feb 12, 2014 Thread starter #8 nuevodia Technical User Feb 27, 2004 57 0 0 US Looked but can't find it Upvote 0 Downvote
Feb 12, 2014 #9 KCFLHRC Technical User Aug 16, 2011 6,082 0 0 US Try isetReset xxx.xxx.xxx.xxx all those x's are the IP address of the set Upvote 0 Downvote
Feb 12, 2014 Thread starter #10 nuevodia Technical User Feb 27, 2004 57 0 0 US That's for eebooting the set. The set reboots but won't upgrade. Upvote 0 Downvote
Feb 12, 2014 #11 gwebster Vendor Jul 1, 2006 2,512 0 36 CA Have you tried downloading the firmware from a tftp/http server? Upvote 0 Downvote
Feb 12, 2014 Thread starter #12 nuevodia Technical User Feb 27, 2004 57 0 0 US Its not an option Upvote 0 Downvote
Feb 17, 2014 #13 fritzthecat Programmer May 15, 2002 149 0 0 DE My be your upgrade policy is disabled go to your sigserver and do an umsPolicyShow, if you see upgrade never you Need to enable it Upvote 0 Downvote
My be your upgrade policy is disabled go to your sigserver and do an umsPolicyShow, if you see upgrade never you Need to enable it