Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1140E convert to SIP
- Thread starter galfsalot
- Start date
name it 1140e.cfg and put it in the root of the tftp....
#
# Config file: 1140E version 6
#
[FW]
DOWNLOAD_MODE AUTO
VERSION (file name)
FILENAME (yourfile name.bin)
PROTOCOL TFTP
SERVER_IP xx.xx.xx.xx
SECURITY_MODE 0
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
#
# Config file: 1140E version 6
#
[FW]
DOWNLOAD_MODE AUTO
VERSION (file name)
FILENAME (yourfile name.bin)
PROTOCOL TFTP
SERVER_IP xx.xx.xx.xx
SECURITY_MODE 0
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
- Thread starter
- #3
Have a look at the SIP 1100 Series Admin Guide which can be downloaded from support.avaya.com.
The first step is to use an 1140e.cfg file (which is what UNIStim uses) with the SIP software binary in it. This will cause the 1140E to load that software and then reboot.
Once the 1140E is running the SIP software, you will need an 1140eSIP.cfg file (which is what SIP uses) and the associated config files for SIP referenced in it.
The first step is to use an 1140e.cfg file (which is what UNIStim uses) with the SIP software binary in it. This will cause the 1140E to load that software and then reboot.
Once the 1140E is running the SIP software, you will need an 1140eSIP.cfg file (which is what SIP uses) and the associated config files for SIP referenced in it.
- Thread starter
- #6
i guess i am usure of the whole thing. see if this sounds right:
created a folder in which i have placed .bin files for unistim and SIP. i have also created a .txt file called 1104e.cfg which has the [DEVICE_CONFIG], [FW] , etc. My assumption all along was that these all belong in the same folder which is placed in the root of the TFTP server. you then adhjust your .cfg file [FW] to look for the correct firmware. am i off base?
created a folder in which i have placed .bin files for unistim and SIP. i have also created a .txt file called 1104e.cfg which has the [DEVICE_CONFIG], [FW] , etc. My assumption all along was that these all belong in the same folder which is placed in the root of the TFTP server. you then adhjust your .cfg file [FW] to look for the correct firmware. am i off base?
- Thread starter
- #7
make sure that there is no TXT on the end of your config file
so it does not read "SIP1140e03.02.16.00.cfg.txt"
make sure it only reads "SIP1140e03.02.16.00.cfg"
also on the TFTP software make sure you selected it as the root folder (with your bin and cfg files in it)
on the phone, in the menu change the TFTP (or provisioning server, i forget which) to point to your IP for the TFTP server.
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
so it does not read "SIP1140e03.02.16.00.cfg.txt"
make sure it only reads "SIP1140e03.02.16.00.cfg"
also on the TFTP software make sure you selected it as the root folder (with your bin and cfg files in it)
on the phone, in the menu change the TFTP (or provisioning server, i forget which) to point to your IP for the TFTP server.
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
also, i had it working with 3 only... not sure about 3.2... you might want to try a 3.0 if you can't get 3.2 working.
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
- Thread starter
- #10
- Thread starter
- #12
on your TFTP server log you will see three entries:
fails reading PRV file
Successful reading CFG
and BIN files....
that's all.....
just make sure you point the phone your PC (TFTP server). If you look at your TFTP server software does it show the phone attempting to DL the files?
Do you have a FIREWALL running on your PC?
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
- Thread starter
- #14
i see the following on my TFTP server software:
TFTP connected from xx.xx.xx.xx:1024,binary,GET.Transmission failed. could not find file C:\1140E\system.prv
followed by:
TFTP connected from xx.xx.xx.xx:1025,binary,GET.Transmission failed. could not find file C:\1140E\1140e.cfg
firewalls are disabled.
TFTP connected from xx.xx.xx.xx:1024,binary,GET.Transmission failed. could not find file C:\1140E\system.prv
followed by:
TFTP connected from xx.xx.xx.xx:1025,binary,GET.Transmission failed. could not find file C:\1140E\1140e.cfg
firewalls are disabled.
it sounds to me like you don't have the TFTP software pointing to the folder where the files are in..... go into the configuration of the TFTP (i use 3CServer)
FILE, the CONFIG, then TFTP tab, then UPLOAD/DOWNLOAD Directory (here select the one your files are in)
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
FILE, the CONFIG, then TFTP tab, then UPLOAD/DOWNLOAD Directory (here select the one your files are in)
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
- Thread starter
- #16
- Status
Similar threads
