Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1010220

Status
Not open for further replies.
GDI

GDI

MIS
May 17, 2002
29
US
How do you setup your system so that certain ext's can not dial 1010220 then a long distance number. Someone is by passing our code entry for long distance phone calls.
 
Sort by date Sort by votes
You do this from the disallowed lists. I believe under the extension programming sublist. Or you can lower the COR on common use phones that will block long distance trunking. I believe there are two or three effective ways to takle that beast!
 
Upvote 0 Downvote
If you don't have a call accounting system, hook up a hyperterminal sesion to the SMDR port, and let it run for a day or two. Search it for the 1010220 code, and you'll have the who, what, and where of it.
 
Upvote 0 Downvote
I have tried the Disallow list with 1010220 and assign my extention to that list and I can still use 1010220. What am i doing wrong?
 
Upvote 0 Downvote
Go to Tables, then to Disallowto, then type 7 for table 7, then type in the extension you want to disallow. Try yours for experiment. Table 7 is a default that should include all numbers starting with 10

Let me know if it worked!
 
Upvote 0 Downvote
ScoTTeL,
I have tried the table 7 and disallow to my extention, but it still lets me dial 1010220....
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top