1000e to 1000t cant access t1 pstn

[gutp1le]

cant call out on pri pstn on 1000t from 1000e

 

[dlesap]

The NRS configuration must match the dialled number format coming in the DCH setup message. Just monitor your Virtual DCH and look the TON type of the call. Then create the appropriate routing entry in the NRS to the 1000T

 

[bignose21]

Would need to know where it is failing as above put DCH mon on virtual trunk onf the 1000E what digits are sent and in what call type, the DCH mon on the 1000T virtual trunk does the call get there?