Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1000b to 1000b calls

Status
Not open for further replies.
lundangler

lundangler

MIS
Jul 17, 2008
24
US
I have an issue wtih a 1000b new turnup. I can call back and forth to the main office, but calling from 1000b to 1000b it rings the set but no talkpath. I also cannot ping from 1000b to 1000b. Should I be able??
 
Sort by date Sort by votes
Yes. You should be able to ping from a phone (or VoIP element) on one system to a phone (or VoIP element) on the other system.
 
Upvote 0 Downvote
No voice media path means you have a network issue. Speak to the network folks and tell them that every IP set at every site needs to be able to speak with every IP set at every other site.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
130
bltodd
bltodd
krtcomm1
  • Locked
  • Question
CLID on tandem calls outbound to PSTN when calls are forwarded externally
Replies
6
Views
243
krtcomm1
krtcomm1
notaphoneguy27
  • Locked
  • Question
CS1000 cannot make outbound calls
Replies
5
Views
279
Firebird Scrambler
Firebird Scrambler
JM2009
  • Question
CS1000 how to use telent to download the ip trunk error message??
Replies
3
Views
314
psychotech
psychotech
AlaskanTech
  • Locked
  • Question
I can make out going calls but incomming calls just keep ringing.
Replies
2
Views
139
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top