10 digits dialing for local call 2

[M1TechSup]

Hi, i want to modify the prompt to allow 10 digits dialing for local call. Can you please help me for do that ? Thank you for your help !

 

[GHTROUT]

Assuming you are in the USA, just add your 3-digit area code as an SPN (in BARS LD90) - assign it to the same RLI as local NXX calls.

http://www.ghtrout.com/bars/

GHTROUT.com | FAQs | Recent Replies

 

[mwpage2001]

do you want to force 10 digits to be dialed?
if so, GHTROUT's advice is your answer. but you can also build a new DMI (LD 86 DGT) to insert the area code automatically for specific NXX. remember, you will also have to build a new RLI (LD 86 RLB) to use the new DMI. or if wish, you could modify the existing RLI and insert the area code before all NXX. this will result in 10 digits being sent, even though only 7 digits were dialed.

 

[M1TechSup]

Thanks a lot GHTROUT and mwpage2001. Your help was very appreciate. And yes, eventually, i will force to 10 digits but for now SPN in LD90 will be OK.

I'am very impress for quick response ! Thanks again !