Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

10 digit local dialing

Status
Not open for further replies.
dabble

dabble

Technical User
Jun 15, 2005
594
CA
Our major carrier just introduced 10 digit local dialing over the weekend.

Now it seems like my IP sets at our remote sites can't dial the 10 digits. They get busies when they enter the 8th digit.

The remote site is a branch office at RLS 6 with IP and digital sets. The digital sets work fine.

The IP sets register back to the main site also at RLS 6.

From an IP set located at the main site, I can dial 10 digits successfully.

Did a print in LD 90
The remote site shows area code 705 as below:
NPA 705
RLI 14
DENY 976

SDRR DENY CODES = 1
ITEI NONE

The main site shows area code 705 as below:

NPA 705
RLI 3
SDRR NONE
ITEI NONE

Any thoughts?

Thanks.
 
Sort by date Sort by votes
print the two rlbs.. post that and we can help

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
The main site RLB for RLI 3 is:

REQ prt
CUST 0
FEAT rlb
RLI 3

RLI 3
ENTR 0
LTER NO
ROUT 51
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 4
DMI 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ NO

ENTR 1
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 4
DMI 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ NO

ISET 2
NALT 5
MFRL 0
OVLL 0

The remote site RLB for RLI 14 is:

REQ prt
CUST 0
FEAT rlb
RLI 14

RLI 14
ENTR 0
LTER NO
ROUT 127
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
SCNV NO
CNV NO
EXP NO
FRL 1
DMI 0
ISDM 0
FCI 0
FSNI 0
DORG NO
SBOC RRA
COPT 1
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ENTR 1
LTER NO
ROUT 126
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 1
DMI 0
FCI 0
FSNI 0
SBOC RRO
COPT 1
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ISET 2
NALT 5
MFRL 1
OVLL 0

 
Upvote 0 Downvote
Is it possible the FRL problem? What is the NCOS for remote IP sets?
 
Upvote 0 Downvote
Someone correct me if I'm wrong but if the IP sets are registered to the main site then the routs at the remote site should not matter? Can you dial the number if you use 1 plus?
 
Upvote 0 Downvote
This issue has expanded to now include one of our remote sites that does not have IP sets. They have a CS1000E at Rls 6 but they are strictly TDM.

It appears now that it may be a problem with the routing from the remote sites to the main site. The remote sites are dependant upon the main site for the outbound calls but I'm thinking the remotes sites are missing something that would allow them the 10 digit dialing.

My vendor is going to charge me for opening up the ESN for each of the sites in order to resolve this.
 
Upvote 0 Downvote
go to ld 117 in the BO and print out the zbr and post it
 
Upvote 0 Downvote
Is it zbr or something else? I did a PRT ZBR in LD 117 but ZBR isn't valid.
 
Upvote 0 Downvote
Sorry, thinking of something else, prt zdp and zacb in 117
 
Upvote 0 Downvote

OK Thanks. Here is my print from the remote site.


=> prt zdp
_______________________________________________________________________________
[79C[A__________________________
| | | Access Co
[79C[Aode Behaviour |
| Zone | State |---------------------
[79C[A-------------------------|
| | | | |
[79C[A |DIALED | NEW |
| # DES | | DC1 | DC2 |
[79C[A DC3 | AC | AC |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 0 Default_Zone | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 2 MG | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 3 | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 20 VTRK | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 21 CSMG | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 22 IPSET | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 23 I2050 | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
No Zones with Local Dialing active
No Branch Media Gateway Zones configured
Number of Zones configured = 7

=>

=> prt zacb
_______________________________________________________________________________
[79C[A__________________________
| | | Access Co
[79C[Aode Behaviour |
| Zone | State |---------------------
[79C[A-------------------------|
| | | | |
[79C[A |DIALED | NEW |
| # DES | | DC1 | DC2 |
[79C[A DC3 | AC | AC |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 0 Default_Zone | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 2 MG | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 3 | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 20 VTRK | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 21 CSMG | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 22 IPSET | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
| 23 I2050 | DIS | | |
[79C[A | | |
|------------------------------------------------------------------------------
[79C[A-------------------------|
No Zones with Local Dialing active
No Branch Media Gateway Zones configured
Number of Zones configured = 7

=>
This is rather cryptic.

does it mean anything?
 
Upvote 0 Downvote
I took a look at this thread I found since it seemed to be the same issue I had.

My print in LD 90 for NXX=790 which for us is one of our more common local numbers 705790XXXX

REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE nxx

NXX 790

NXX 790
RLI 1
SDRR NONE
ITEI NONE

My RLI print in LD 86 for RLI=1 is:

RLI 1
ENTR 0
LTER NO
ROUT 127
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
SCNV NO
CNV NO
EXP NO
FRL 1
DMI 3
ISDM 0
FCI 0
FSNI 0
DORG NO
SBOC RRA
COPT 1
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ENTR 1
LTER NO
ROUT 126
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 1
DMI 3
FCI 0
FSNI 0
SBOC RRO
COPT 1
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ISET 2
NALT 5
MFRL 1
OVLL 0


The sets NCOS at this site are 4.

Users are dialing 8705790 then they get a fast busy before dialing the last 4 digits. Our AC1 is 8 rather than 9.
 
Upvote 0 Downvote
In LD 90 you probably detail 1705 as an NPA entry, but not 705. Add 705 with the same options as they would have normally dialed the 7 digit number.
 
Upvote 0 Downvote

My DMI 3 is:

REQ prt
CUST 0
FEAT dgt
DMI 3


DMI 3
DEL 0
ISPN NO
INST 705
CTYP NPA

I looked in LD 90 and I do have 1705 as an entry, but some exchanges within the 705 area code are long distance and some are not.
 
Upvote 0 Downvote
if they are LD the 1705 will dial them, if they are local the 705 will dial them, this would be determined in the telco C.O.
 
Upvote 0 Downvote
Or you could force allow and disallow various NPA's within the PBX if you wanted to.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Emara
  • Locked
  • Question
when dialing the access code and th
Replies
1
Views
164
Firebird Scrambler
Firebird Scrambler
Casey Jordan
  • Locked
  • Question
Nortel Meridian Opt 61c and 10 Digit Local Dialing...
Replies
1
Views
116
Firebird Scrambler
Firebird Scrambler
CentralJIM
  • Locked
  • Question
7 digit to 10 digit dialing using NCOS?
Replies
17
Views
224
CentralJIM
CentralJIM
bad69cat
  • Locked
  • Question
How to enable 10 digit dialing on Opt 81?
Replies
3
Views
118
bad69cat
bad69cat
leekawai
  • Question
3902 Digital phone random ringing
Replies
2
Views
283
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top