10 digit DID diplay to outside phones

[gatorcoffee]

I have multiple prefixes in my block of DIDs. According to this thread798-1418177 I'm assuming I would need to create a seperate HLCL entry for each prefix sequence and assign the 4 digit extn number as it would relate to the respective entry, correct?
in other words entry 1 shows for 972422, but I would need an entry 2 for 972263

current is listed below...

ENTRY 0
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 9724228678
DIDN NO
HLOC
LSC

ENTRY 1
HNTN 972
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 972422
DIDN YES
HLOC
LSC

 

[acewarlock]

You say you have 2 NXX's 422 and 263 Right?

ENTRY 0
HNTN Should be 972
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 9724228678 Should be 422
DIDN NO Should be YES
HLOC
LSC

ENTRY 1
HNTN 972
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 972422 Should be 263
DIDN YES
HLOC
LSC





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.