Hi all, I'm wondering if anyone has had "issues" with 2 Polycom CX600's logged in as the same user? I have an executive with two offices at separate sites complaining of one-sided conversations on incoming calls where he can't hear the caller but they can hear him. If he calls them back, all is good. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1 user, two Polycom phones in separate locations
- Thread starter huddleto
- Start date
Is the problem only ever on one of the phones? What does Snooper say?
I have multiple phones all over my house, and multiple machines with headsets, and a cell phone with simulring and don't have this issue when answering from any of them.
Do you have your Tek-Tips.com Swag? I've got mine!
Stop by the new Tek-Tips group at LinkedIn.
I have multiple phones all over my house, and multiple machines with headsets, and a cell phone with simulring and don't have this issue when answering from any of them.
Do you have your Tek-Tips.com Swag? I've got mine!
Stop by the new Tek-Tips group at LinkedIn.
- Thread starter
- #3
Turns out it was an issue with how we were forwarding an old number to his Lync number via Nortel. It was a phantom TN with FTR to the Lync number. I outed it and built an ACD DN with NCFW to the Lync number it works no problem now. I should have looked closer before posting to this Lync forum. Sry.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question