-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
!00BaseT Standards 1
- Thread starter rewas
- Start date
rewas:<br>
<br>
512-bit == 64 bytes This refers to the collision domain. Recall that in CSMA/CD to ensure a collision free transmission, the transmitting device must be able to receive its own first bit before the last bit has been transmitted. This applies to 10Base-T as well as 100Base-T.<br>
<br>
Here's a URL that gives concise specs for 100Base-T:<br>
<br>
<br>
Hope that helps,<br>
jfk<br>
<br>
512-bit == 64 bytes This refers to the collision domain. Recall that in CSMA/CD to ensure a collision free transmission, the transmitting device must be able to receive its own first bit before the last bit has been transmitted. This applies to 10Base-T as well as 100Base-T.<br>
<br>
Here's a URL that gives concise specs for 100Base-T:<br>
<br>
<br>
Hope that helps,<br>
jfk<br>
- Status