Search results for query: *

Verify that your preheater is ok before putting in the new power supply. The bulbs sometimes make bad contact on their connectors which causes arcing. Replacing parts is not allways the best solution. check to see what caused the problem or you could be face with the same problem causing a dent...

If you swap the code rom from the older board to the replacement board, this should rectify your problem. It is the first slot close to the flasher plate on the main ESS board. It looks like a memory dimm but it has a sticker on it saying tektronix postscript. Your print features change a bit...

Check the cycle of the transfix solenoid... By using electrical tape or any plastic surfaced tape, can still create a jam as many times the foam rubber pad on the solenoid leaves a sticky surface on the brass coloured plate. I would rather recommend that you use a paper sticky label. But to...