Search results for query: *

For anyone with a similar issue, here are the commands to "activate" the port: conf t Configure "card-type T1 2" Then "controller T1 2/0". Thanks,

Just verified, the vwic is supported by the 2811.

Hi, I installed a new WIC (vers.2) in 2811 but I do not see a serial port available to configure. I restarted, still no luck. Sho Diag does see the wic installed. I tried moving it a another slot but the same thing. Do the wic's need to be "activated" or something? yourname#sho diag...

Burtsbees, correct, the vlan and dhcp server are on the same switch.

10.11.44.3 is the DHCP connected directly to the switch.

Hi, I am running into an issue where a laptop connected to a switch that has ip-helper configured is not able to get an IP from the dhcp server. The switch can ping the DHCP server and vice versa. I also tried to setup a separate DHCP server to rule out the dhcp server being the cause but no...

Hi, I am not able to create a vlan on this model router. I get an % Invlaid input error. Here is the version of the ios. Thanks in advance. ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2) BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(14)E6, EARLY DEPLOYMENT REL...

.1 and .2 are fa0/23/24. I am wondering if the gateway can be configured incorrectly.

correct, .3 is on fa0/25 and .4 is on fa0/26. VLAN Name Status Ports ---- -------------------------------- --------- ---------------------------- 1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6...

Layer2. No access lists. The config is below. version 12.2 ! ip subnet-zero ip routing no file verify auto spanning-tree mode pvst no spanning-tree optimize bpdu transmission spanning-tree extend system-id ! vlan internal allocation policy ascending ! vlan 2 name GreenNet ! vlan 3 name...

No firewalls on the switch. The ports are on the same vlan. My desktop ip is 10.111.x.x. But whats got me confused is from the same desktop, i can ping 10.1.10.1 & 2. Both ports are configured exactly the same with the access to vlan 119. Thanks.

Hi, I have a cisco 3550 with 4 ports used to connect 4 different devices (10.1.10.1/2/3/4). I can ping all 4 from the switch without a problem. I can also ping all 4 in a workgroup environment using a small 5-port switch and a laptop. But from my desktop, i can only ping 10.1.10.1 & 2. I...

Hi, Need some (steps) on how to proceed with this scenario. We had Exchnge 5.5 with user emails from 1/2002 til 5/2005. We then got a new exchange 2k3 server and exmerged all of the exchnge 5.5 data to the new one. On 1/1/06, our new exchange server storge array died(server is fine). So...

yelworcm, We added a larger HD and moved the DB to it. Eversince then, Ghost Clean has been showing up. It never showed up (atleast did'nt lock any users) before.

Hi, What is ghost cleanup? Can it be stopped? Approx. 10am for the past 2-3 days it has been running and locking the DB so none of the connected users can retrieve data. Any help is appreciated. Thanks.

Hi, We have a 4 enclosure setup of Xyrtx rs1600's. We had a power failure earlier today. Since we brought the system back up, an array has been missing for ensloure #2. All drives in that enslure are labled "leftovers". We have critical data on these drives. I spoke to a Xyrtx Tech who walked me...

No, I was not even able to send or rceive a simple 396kb test email. All seems to wokr fine now, I moved my mailbox to a seperate storage group and then moved it back into the original one. Not sure what choked. Thanks.

Hi, Whenever I try to send an email from Outlook2003, i get a box stating i have exceeded mailbox size limit but we do not have any limits in our domain. My 1.2gb mailbox is restricted from sending and reciveing email while other mailboxes that are 4gb and above are able to send email and...

I had setup an owa server with a static Ip to be accessible from anywhere on the internet. Since last few days, the site is only accessible via IP from outside. The fqdn does not resolve from the outside. Internally, the owa is accessisble via fqdn and ip. The firewall was checked and looks...

FYI: It turned out that the IP address for Office2 that Office1 was using was incorrect. They were sending it to x.x.x.21, whch is a half built exchng2k3 box (no emails prccssng yet). So no emails via our connectors were getting delivered to our 5.5 box. That also explains why email from and...