Duster22,
I have had experience configuring QOS on both WAN link types. You are correct in your view of having total control over QOS via leased lines(QOS is easy to configure over the leased lines as well). QOS over MPLS is a bit more advanced to configure due to you have to make sure your...
Robertjo24,
You forgot to mention about the carrier performing loopback tests and failing to remove it after they tested. We see a lot of this as well.
Bill
Andy,
Thanks for the suggestion. It worked! I have been able to successfully download the new code to the AP. Will keep a sharp eye out for my CLI typos for TFTP in the future.
Your Help was greatly appreciated. If I could be of any help with Network - related issues you may have in the...
Andy,
I have tried different TFTP servers, as well as FTP. Confirmed I am upgrading over the ethernet as well. Tried different pc's just in case.
Weird stuff for such a basic process.
Bill
Hi Andy,
I have the same model AP as Jim's (Aironet 1231G). I have experienced a similar issue during tftp upgrade of the cisco IOS from c1200-k9w7-tar.122-13.JA4 to c1200-k9w7-tar.123-7.JA3.tar. Have tried both the GUI & CLI(as well as on different pc's), but get a failure message of "invalid...
Hi Folks,
New to this forum. Was wondering if any body has any suggestions for this scenario:
Two ARN routers connected via MPLS confgiured with BGP-4,
PPP(Std), DVMRP, & IGMPv2. I also configured a DVMRP tunnel(verified that both interaces were configured with the protocols and routing was...
Hi dane,
New guy to this forum & site. Would appreciate it if you could help with defeating the password for the ARN. I have an old one at work that I do not have the password to access.
Any help would be appreciated!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.