Search results for query: *

I got a little utility called Dr. TCP and ran it on the clients that were working as they should, it showed my MTU as 1300 and on the flaky clients it was set to no value. changed to 1300 and rebooted. all works as it should! thanks all.

here is one that is stumping the heck out of me. I have a t1 running into my network through an adtran 3205 router csu/dsu, then it runs into a temporary server which is doing basic routing and DHCP. I have two of the dozen or so machines here that can access any web site at any time. The others...

Accoprding to the provider they aren't either, its just a straight voice channel handoff, we just need to tell the magix that whats coming in are 8 t1 voice channels and to treat them as voice lines,

OKay i have definate confirmation this is a standard B8zs T1 handoff from my t provider

The adtran just passes through channels 17-24, it has nothing to do with the service. its the same setup i used with my parter acs v7 and it works great. Each one of those channels has its own dial tone and is a line for the system. I think my tech contact at the t provider has no clue what he...

My INA card is in slot two, it goes proc.- 412 TDL then the 100r INA then my other extension modules.The netvanta takes the raw T1 from the smart jack and splits out the data and acts as the edge router for those IP's while the voice channels get sent out from the dsx1 port on the adtran into...

hey all, just installed a magix system and it will not work at all with the T1. Configuration as follows: T1 comes into a netvanta 3205 data is split out (channels 1-16) channels 17-24 are routed out the dsx1 into the ds1 on the 100r INA module on the PBX. this is a standard ESF B8zs signal &...