Search results for query: *

We have a site that is currently using a Contivity 1100 over a T1. They have maxed out their bandwidth and are still growing so it is time to look at a circuit upgrade. I was planning on bumping them to a Contivity 1750 and a frac T3, but everyone keeps offering us bonded T1s. I always thought...

I have several old Cisco 2600 routers sitting unused in my lab. I also have a need for some sort of term server to manage multiple devices over one phone line at my Branch office locations. Is it feasible to take the 2600 and put an Asynch card in it to create this?

That is the direction I was thinking in as well. The topic has recently come up and I thought I would find out what others are doing.

Currently our COntivity 2700 is running parallel to our PIX FW. The 2700 accepts both BoTs and remote user tunnels. I was not involved in the initial design of the VPN setup and was just wondering if it would be more secure to have the Contivity sit behind our FW instead. Of course then I would...

I am studying for my CCNA and I have a couple of old 2924XL switches that I am using along with two 2600 routers. I have a CCO account through work, but am having problems finding updated code for the switches (havn't tried the routers yet). Will I be able to access code for these even though...

Is it possible to have two separate tunnels between two Contivity boxes? I have a point to point T1 connection to one of our remote offices. I would like to put a contivity at the remote site on the other end of the T1. However, the site requires a separate lab network. Traffic on this network...

How difficult would simulating a frame switch be? I have 3 2600s at my disposal and two Cat 2900 switches. I would like to be able to set up a frame connection as well as point to point.

Thanks. It looks like I found one not being used. I will use your pinouts to try and make another.

I have two 2600 routers that I want to set up in a lab environment. I am hoping to take the CCNA in the next month or so. What type of cable do I need to connect the two T1 interfaces (RJ-45) to emulate a serial connection. I want to be able to set up frame relay etc. I have done this several...

I have a branch office that I am looking into replacing with Cisco equipment. Currently it is set up using Nortel ARN's as well as a direct T1 connection to our 7204 border router. The ARN's connect to each other and our border router connects (via the direct T1) to a Nortel AN router. I am...

It looks like it is a fan failure. Two out of three fans appear to have failed.

Here is the trap our Openview system is receiving. 1125426962 2 Tue Aug 30 14:36:02 2005 10.206.201.13 - Received event .1.3.6.1.4.1.45.1.6.2.4.0.2 (enterprise:.1.3.6.1.4.1.45.1.6.2.4 generic:6 specific:2), no format in trapd.conf. 2 args: [1]...

I am receiving unusual traps from one of our BPS 2000s. The switch log shows "Trap: s5CrtProblem". I can't find any reference as to what this indicates. Has anyone else seen this before?

I have been asked to implement policy inforcement on our remote VPN users. I need to be able to verify that users have up to date virus protection and the latest Windows Updates. Tunnel Guard seems to do this. However, the more I plan this out the more complex it seems to get. Does anyone use...

We are running iBGP between the two routers. One router is our primary and the other is its backup. Also have HSRP running. I am not great at BGP, but once it converges shouldn't the only updates be if a route changes? All other routing to our internal network is static. I am looking at a packet...

I just analyzed some of my ping data and it seems the spikes happen every 65-66 packets. This seems to regular to be a priority issue????

We have two 7204s for our border routers. The routers are connected to a Nortel Passport 8600 (layer 3 switch) and we have a PIX FW also off the switch. When I run a continous ping from our internal network to our dmz network on the router I am getting spikes in ping times. I have seen this...

I have been asked by my security team if it is possible to require that remote users have certain software (virus protection, latest windows updates et) before allowing them onto the Contitivy switch. I know you can require a certain level of code for the Contivity client, but have never heard...

I am running 12.2(19a) so I should be able to use sequence numbers. Can you provide me the correct syntax to do so? I havn't been able to find any good doco on how to do this. I would love to convert my ACLs to use these. Thanks.

Do you know what version IOS I would have to go to for this?