Search results for query: *

Forget about configuring NIMSH... Still have this problem and really don't understand... 0042-001 nim: processing error encountered on "master": 0042-001 m_sync: processing error encountered on "d01x21": 0042-028 c_sync: "nim_name" cannot be used for this operation Any help will...

I think that NIMSH is required for an alternate nim master... I check this and I will post the result...

Thank you very much for your help. I now have a problem of synchronization. I am not able to synchronize on the primary nim master... Here is the error: 0042-001 nim: processing error encountered on "master": 0042-001 m_sync: processing error encountered on "d01x21": 0042-028 c_sync...

Here is the error I had: niminit -a name=d01x21 -a master=d01x20 -a connect=shell 0042-376 niminit: This command cannot be executed on a NIM master unless the "is_alternate" attribute is specified. I notice that the /etc/niminfo file was neither on the alternate-master nor on the...

But, i did not configure nimsh. Why is it set like this? All my client were set to connect=shell.

# lsnim -l d01x21 d01x21: class = machines type = alternate_master connect = nimsh sync_required = yes platform = chrp netboot_kernel = mp if1 = net_172_18_225 d01x21 00025576F0A2 ent0 cable_type1 = N/A Cstate =...

When I do this command: nim -o sync -a force=yes hostname2 I have this error: 0042-001 nim: processing error encountered on "master": 0042-006 m_sync: (From_Master) connect A remote host refused an attempted con nect operation. nconn: connect() failed, errno is 79 hostname2: A remote...

cspilman = Yes, this rule I know. But I'm not talking about NIM master and client. I'm talking about NIM master and Alternate Backup NIM Master.

Can we have an AIX version 5.3 TL12 that will be the alternate backup master of a server that is at AIX version 7 update 3? The 2 machines are also different type machine. (7028-6C1 et 9110-51A) Note: It is not possible to install AIX v7 on a 7028-6C1.

Is TDPO 5.2 is supported on AIX 5.3? Where can I find this information, I search and don't find. Thanks.

How to disabling the cluster wide password admin in hacmp 5.2 and hacmp 5.4?

Sorry, It's ok.. The 7 correspond to the level 5.4.1.7 so it's OK... ----- Fileset Revision Level Identification The fileset level is referred to as the level or alternatively as the v.r.m.f or VRMF and has the form: Version.Release.Modification.FixLevel where: * Version is a numeric...

Hi, I have upgrade my hacmp software. Everything is ok and in the odm, when I do these command, odmget HACMPcluster| grep cluster_version odmget HACMPnode| grep version The version are all at 9. But, When I reboot the system, I see with the command alog -o -t console this message...

To remove EFIXLOCKED, you have to do emgr -l (to see the LABEL) and emgr -r -L LABEL. But, I don't know if there is some negative impact to do this... If someone have an idea, please let me know... So, I still have a BROKEN fileset... Any idea???

And my HACMP update, the fileset is in the sate BROKEN... #lppchk -v lppchk: The following filesets need to be installed or corrected to bring the system to a consistent state: cluster.es.cspoc.cmds 5.4.1.7 (BROKEN)

When I go to smitty and use the option clean up failed installation, i have this: 0503-439 installp: No filesets were found in the Software Vital Product Database that could be cleaned up.

I update HACMP and my update fail with a BROKEN fileset because the bos.rte.security was EFIXLOCKED ... bos.rte.security 5.3.11.1 COMMITTED Base Security Function EFIXLOCKED How can remove the EFIXLOCKED to the bos.rte.security? (So after, I...

How can I solve this problem? I restore a mksysb on hdisk0 (Hitachi Disk on SAN), the bosboot was created with success but when it want to set the bootlist, it failed whit this error: 514-210 bootlist: Device is not in the AVAILABLE state... I Perform System Maintenance and I see these...

I use snmp V1 and I sent trap to a Netview server and everything is OK. But, running any snmpinfo command, it always return "No response" at the command line. Is it normal? Example: snmpinfo -m dump snmpinfo -m get -v sysDescr.0 ifDescr.1 Any information will be appreciate.

I was at AIX 5.2 and I have migrated to AIX 5.3. When on AIX 5.2, we were with SNMP v1. Can you help me on how to migrate from snmpd.conf to snmpdv3.conf? I use these instructions but it doesn't work: http://publib.boulder.ibm.com/infocenter/pseries/v5r3/index.jsp Maybe something I don't...