Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ifconf

    Cisco 851W - Factory Reset - Boy was I wrong!

    Your Interface VLAN1 is in a shutdown state. do no shut on int vlan 1
  2. ifconf

    Unicast flooding

    I need to add some static entries to the mac address table in my switches to effectively manage unicast flooding in my asyncronous network. On my 2960 switches (model WS-C2960G-48TC-L) I am able to set the static entry as follows; mac address-table static aaaa.bbbb.cccc vlan x int gi0/44 gi0/45...
  3. ifconf

    Site to Site VPN Cisco 877

    I have R62 running on an IP390 cluster. I need to setup a VPN with a Cisco 877 router which has a dynamically assigned IP address from the ISP. Does anyone know if this is possible and if so help me with some tips, also where can I find documentation on this subject CP site doesn't seem to have...
  4. ifconf

    Nokia Cluster VNP SecureClient problem

    Hi, I have recently upgraded from NGAI R55 on SPLAT to NGX R62 on a Nokia IP390 Cluster running IPSO 4.2. Everything has worked perfectly except for my SecureClient. If the logon traffic is handled by the firewall that is not the master the logon fails. If the logon is handled by the firewall...
  5. ifconf

    ntl cable DSL and default route

    I have several home users that have ADSL connections. Most of them are on BT lines and using SB107 routers. I configure these with the following route statement to connect to the internet; ip route 0.0.0.0 0.0.0.0 D0 This works perfectly well as expected. However, some of my remote users have...
  6. ifconf

    Microsoft VPN client behind Checkpoint

    Unfortunatly that is not an option as I have up to 30 support engineers that may have to use this method of connecting. I cannot afford to use up 30 registered IP's. I know that this is possible with other types of firewalls so it must be a configuration issue.
  7. ifconf

    Microsoft VPN client behind Checkpoint

    I have Checkpoint NG AI R55 and I am trying to establish a VPN connection from my XP Pro Workstation to a Microsoft 2000 VPN server which is behind a Sonicwall firewall. The VPN connection times out with the error "Error 721: The remote server did not respond". I know that the VPN server is not...
  8. ifconf

    Wireless connection to proxy server

    Hi Zen37, arp requests are being passed through the bridges, I can confirm that they are resolving to the MAC of the ethernet card on the PC all they way through from server to PC. I haven't been able to sniff the packets yet.
  9. ifconf

    Wireless connection to proxy server

    I have two buildings approximately 300 yards apart connected together with Cisco 1310 access points/bridges. The 1310's are configured as root and non-root and their sole function is to extend the LAN from the one building to the other, they are not used as access points and all workstations...
  10. ifconf

    connecting to my FTP site on Windows Server 2003

    I've also been working with Server 2003 FTP permissions, so far I found my login only works if I use domain\username, username on it's own would not log on.
  11. ifconf

    cannot access .asp pages on web server

    I have solved this problem if anyone has the same problem. I was the Cisco router causing the problem, and the cause and solution was as follows; PPPoE standard supports an MTU of only 1492 bytes. The disparity between the host and PPPoE MTU size can cause the router in between the host and the...
  12. ifconf

    cannot access .asp pages on web server

    Hi. I have a Windows 2003 server running IIS which sits behind a Checkpoint FW which in turn connects to he internet using a Cisco 837 ADSL router. I have removed all access lists from the Cisco and I am not doing any NATing on the Cisco, all NATing is done on the Checkpoint. The problem that I...
  13. ifconf

    .asp pages not visible externally

    I have a Windows 2003 server with IIS 6 running. I can connect to it internally and everything works fine. If I try to connect from outside my network the .asp pages never load, only a blank screen with done in the bottom of the browser. I know that the connection is fine as I can see the...
  14. ifconf

    Outlook Web Access Logout problem

    I have Exchange 2000 Server, latest SP, everything working fine. I can login using OWA, send, receive, check opublic folder etc, everything...but. When I click logout I get an error "Server Application Error" and the text below reads"The server has encountered an error while loading an...
  15. ifconf

    COM/DCOM Problems w/ng R55

    I had the same problem running on Secure Platform, to solve it I had do the following; PROCEDURE: 1) On the SmartCenter Server stop the firewall services by typing at prompt: cpstop 2) Perform a backup of the $FWDIR/lib/dcerpc.def file. 3) Edit the dcerpc.def file. Original /*ALLOW_135 is...
  16. ifconf

    Checkpoint R55 on Windows 2003 server Smart Dashboard

    I have installed R55 on a Windows 2003 server which is connected to a Cisco 837 ADSL router. I have no ACL’s or NAT on the Cisco router so all traffic is passed straight through. I have setup the IP address of the firewall on my main site as a GUI client and added the same IP address in the...
  17. ifconf

    DCOM application very slow

    I have a PIX 525 connected to one of the LAN interfaces on a Checkpoint FW-1. I have a server on the DMZ port of the Checkpoint that runs an application that creates COM objects on a server connected to the LAN port of the PIX. The problem is that the COM objects tke + - 90 seconds to be created...
  18. ifconf

    Secure Platform and Interface Teaming CP NG AI

    Hi, is it posible to team two interfaces in Secure Platform for Checkpoint NG AI. I am planning to implement redundancy for all my switches, probably using CISCO 2950 switches with spanning tree enabled. I want to be able to double up on all interfaces on my Checkpoint and team each pair so that...
  19. ifconf

    NAV 7.6 and XP SP2 cannot connect to client

    Hi, I have Norton Antivirus 7.6 corporate edition on all my workstations, my workstations are all Windows XP Professional. After rolling out XP SP2 on some test workstations I have found that I cannot connect to the clients through the symantec system centre. If I restart the Norton Antivirus...
  20. ifconf

    FTPS through Checkpoint NG on port 21

    Hi, did you get a resolution to this problem?

Part and Inventory Search

Back
Top