Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
swapping disks between DAE's
This should not present a problem. Insure that none of the disks are in raid configurations. Using Navisphere Right click on the CX system and select Disk Summary. All disks in the target DAEs should show unbound. Allow at least 30 sec for spindown after unlatching drives before transporting... -
FC4700-1 Unable to access security information
I have upgraded Navisphere Manager from version 5.1 to 6.6. I am managing a FC4700-1 and a FC4700-2, both which were purchased on the used market. Unlike 5.1's application interface version 6.6 is browser based. When launching start.html a Select Connection Type dialog comes up. If I select... -
Unable to logon to IP4700
I reviewed earlier posts and found that an answer to my question was posted earlier by MrMicroTech in thread511-961564 on 01/26/05. Note that the password recovery must be completed within 5 minutes of clariion sp initialization. Thanks! -
Unable to logon to IP4700
Hi everyone, We recently purchased a IP4700 on the used market for our lab. I attached a serial cable to SPA and using HyperTerminal monitored the power on and initialization. When all completes there is a IP4700 banner with Press any key to continue, which then prompts: Logon to File...
