Search results for query: *

Poped a 72gb drive in and it worked no problem, thanks guys!

Like I said I have HP part number 310587-001 it is a DL380 G3 no G5 HP DL380-G3 Server with Xeon 3060 Processor The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users...

No only 1gb.

I have HP Part Number 310587-001

I am trying to install CUCM 6.1 on a DL380G3. I have the exact hardware as mentioned on the following link, but the setup wizard still tells me the hardware is incorrect and setup cannot continue. I am using a SmartArray controller, dont see that on the list but it came with the server part...

No, I am using VOIP dial peers to a sip trunk. I must use translation rules as the prefix command the stripping the first digits from the destination-pattern command do not work.

Hey guys I have a CME system at my small business and I am now in need to translation rules because my internal 3 digit numbering plan conflicts with some area codes in the US. I want users to have a dial a 9 then the 10 digit phone number for local calls. I also want users to have dial a 9...

OK I have signed up for the Broadvoice bring your own device progam to test call forwarding. Guess what same problem. I am thinking this has to be something on the CME side now. Any other ideas?

Anyone else??? I am still fighting this.

call transfers to the outside work fine, call forwards work but you each party cannot hear to talk to one another.

The voice rtp send-rec is already enabled. I will try the bind commands. What do they do?

call transfers to the outside work fine, call forwards work but you each party cannot hear to talk to one another.

OK i got call-forwaring to work using the NO SUPPLEMENTARY-SERVICE SIP REFER and MOVED TEMP commands but either end cannot hear or talk to one another. Any ideas?

We cannot call-forward to numbers on the outside, inside extensions work fine, but it does not do anything when trying to call forward to a outside number. Any ideas? I think I need to hairpin the call but the routers is trying to use VOIP standards to forward the call. How can i accomplish this?

Also, We cannot call-forward to numbers on the outside, inside extensions work fine, but it does not do anything when trying to call forward to a outside number. Any ideas?

We need to be able to dial #.. to call forward our main line. I have dial-peers for 0, the * key but the dial-peer for the #.. does not work. Any ideas?

Yes it worked beautifully, thank you!

I am setting up a new system. Is the best way to make my incoming line ring on a select few phones it to create a ephone-dn for it and assign it to the 2 phones i want to ring, correct? Then the other phones will just have the internal extensions masked with the clid command you gave me. I want...

Hi, Thanks for the response. Could you point me in the right direction with some config or commands to issue?

Hey guys I have my SIP trunks fully functional with inbound and outbound calling, the problems is, my public line is only going to be on 1 phone. If I do not put that line on every phone the other users cannot place outgoing calls. The debug logs try to talk to my ISPs server as...