Search results for query: *

GM2005, greatly appreciated. ;-) I think I'll try reading 2 minutes of documentation next time before erasing flash and changing registers w/o backing up or documenting next time...... Thanks again, jw88 How many times must one be bitten before learning?.....

Also...the one WIC came from the 1721 in a working environment so I know it shouldn't be a hardware compatibility problem. Could a version of IOS work with the card in one router but not another model? Thanks again, jw88

I have two cisco routers (1721 & 1750), each with c1700-y-mz.121-27b.bin installed. The problem is the 1721 does not seem to recognize a WIC card in either slot (WIC 1DSU T1). Both cards work fine in the 1750 but appear dead in the 1721. The 1721 was pulled from a working environment and...

Postini is a hosted solution with excellent results. Not sure how expensive it is but it does a great job. I believe AppRiver is another hosted solution if you want to go that route. We use DoubleCheck in our office. Built around open-source SpamAsssasin with the a double-check web gui...

I have a Nokia IP40 and a Checkpoint Edge W. My goal is to use the DMZ port on each to setup a vpn connection using local ip addresses (172.16.3.253 & .254/30) I can't seem to get this working. The vpn wizard establishes the connection but I can't pass traffic between the two lans. When I...

I have a brand new Sonicwall TZ190 running firmware 3.6 EOS. I used the setup wizard to configure the network settings and outbound access works fine. However, when I tried to create NAT and access rules to allow inbound connections to a server, I see the traffic is blocked in the log. I...

Excellent information again. I might be bold enough to give your idea a shot. Knowing what I about the normal boot sequence, it makes sense. I'll post my results either way. So I guess I shouldn't have labeled my drives with sticky-notes? ;-)

The problem isn't your firewall or av software....it is totally unrelated. Spammers have software to obtain email addresses, possibly from websites you have visited if you entered an e-address, email replies you have sent, your comapany website, and sites like these if people list their...

Blister911, thanks much. That's the information I was after...how the boot process works when scsi drives are involved with a raid controller. (ML350 G3 by the way) Before your post, I considered doing exactly what you said. However, if I pull the old drives, delete the array and the...

I'm not sure I follow you on mirroring the new drives and then converting to RAID 5. Does that process somehow extend the system partion? From what I read on the web, Partition Magic does not install on a Windows Server OS. I'd consider using Acronis Disk Direcotry Server Edition but that's...

I was really hoping to stay away from touching the original drives so I have them in case of problems. Does anyone konw if the HP ACU boot disk allows a person to set partitions as bootable? If so, I think I can pull the original drives and when the server boots, it should find the boot...

I have a Proliant G3 with a Smart Array 641 controller and 3 36GB drives (RAID 1+0) running Windows 2003. It has two partitions with the system partition, originally 4GB, now running out of space (only 280 MB left). We purchased 3 more 36 GB drives (all same specs) and I installed them and...

Thanks much for the info. Looks to be exactly what I need.

I need to access an Oracle 8i server running on Win2K server. I'll be accessing it from a WinXP Pro laptop and would like to know what client software I need to install and how to get it. It appears that I can't get client software for 8i from the Oracle website anymore. I inherited a C#...

Can anyone tell me where to get practice tests/questions or study guides for the Nokia Security Administrator exam? Boson doesn't sell a practice test anymore and all I got from a Nokia CSR was to try and buy course guides from a reseller. The NSA I & II books sell for $250 each! I do have...

On a Nokai IP330 the bootmgr is on the harddrive so using the dd command fixed that. I now also have access via voyager (didn't realize that worked right away) but I still can't type when connecting via the console. I haven't tried telnet yet but if it works, are there any commands I can run...

I used dd on a linux box to copy a second ip330 hd's image onto the existing hd but had the same issue. Looks to boot properly but I can't type anything at the command prompt. I also swapped the hard drive out and placed it into a second IP330 and the hd looked to be fine. Anyone have other...

Another option is to copy one hd to the other. Pull both drives and connect to a linux box. From the shell prompt: dd if=/dev/hdb of=/dev/hdc bs=1024k

If you are talking about the IP330 I just bought two of them off Ebay from two different suppliers. Both came with Checkpoint but NOT the checkpoint licenses. So...you can install with full functionality but only for 30 days. And if you upgrade the ipso image you'll need a valid login to the...

Does exactly as Chris says. Avoid the command only if your firewall is currently connected to the internet. All traffic is allowed thru your firewall until you either load the initial policy (which blocks all inbound traffic) or you reload your existing policy. JW88