Search results for query: *

If I recall VT102 will give you the F1-F4 keys.

I meant module since it's not actually in a card slot.

Do not trust that your NTAK18 card is good just because you replaced it! Also when you do replace that card I believe it's recommended that the Mail be down and cards backed out.

Found a way so I'll share how I did it. First I used this script to see what was being sent. proc main keyget i0 usermsg "%x" i0 endproc By running this and pressing ALT & ARROW UP it showed that c26 was being sent, then made below script to have key press send it. proc main sendvkey...

I want to send the equivalent of alt and the up arrow with a single keystroke, if possible.

How can I remap a single key to send alt + up arrow?

Thanks Knob! No more Datastorm support. No more Symantec support. Some wonder when Procomm will expire. Methinks when Knob retires Procomm will fade to black.

No, that just lost all of my custom terminal setups (which I could reprogram) but still no Com ports above 4.

I added some USB Com ports (8 & 9) to my PC. How do I add these to Procomm so I can select them? I modified the PW5.ini in Windows with: [options] AddPortsCount=5 AddPortsStartNumber=10 which I got from the Symantec help files. That didn't work.

GHTROUT's Call Forward info is exactly right, Here it is from Nortel Feature Guide: Call Forward All Calls (CFW) automatically forwards incoming calls to another destination, within or outside the system. Only calls to the Prime DN or any single-appearance DN on the telephone are forwarded...

Dialing from non prime key: When an external call is set up from a digital set with multiple DNs programmed using any key other than the Prime DN key, the Meridian 1 outputs a CDR N-record at the end of the call. The ORIG-ID field of the N-record holds the value of the Prime Key DN. A new...

That be a sysload!

It was happening every time, it has since stopped doing this!

Getting "This telephony device has been removed. Please Exit the program and restart" inside a message box labeled "Windows Telephony Warning". If I click OK program seems to run OK?

You should also unseat all cards except for the buffer and try one card at a time. One shorted/bad line card could cause your problem.

SCH0767 Supervisor's AGT key must be removed before removing agent.

Make sure the set is not Acquired and, What is the SCH code you are getting? Have you tried outing the set completely?

I've always used CLID entry "D" for all but the Prime DN. Key 0 SCR 4512 1=Your Clid entry Key 1 SCR 34512 D All other line keys

I thought that in PDT: trp = a warm start or restart the sl1 task reboot = is an init reboot -1 = a full system restart

Small System Option 11 LD 30 TEST