Search results for query: *

Thank you both for the info!! Just taken another look at the Pivot Plate and it is cracked in the top right corner. Thank you again!

Hello, I have been working on a Xerox Phaser 8400. The wax on print outs has been sticking to the drum (only around the right hand side) and pulling the print off the paper, causing the prints to eventually get stuck. I replaced the drum, as the wax had got so bad on the old drum that it...

Hello, I'm trying to work out what exactly the problem is with a Phaser 6300 that I'm trying to repair. It is giving the error message Main Motor Failure error code 105. I've tried looking for this on the Xerox website but I couldn't find any information on the particular error I'm getting...

Hello, I have a problem with a Xerox Phaser 8500 that is giving the following error: 08,009.43 - I've tried to look this up but haven't had much luck finding info so far. Has anyone got a solution or any idea what the fault is pointing too? I'm sorry if this has been answered elsewhere, I...

Hello, I'm currently working on a Phaser 8550 that gives the 09,35.43 error (Cyan Ink Stick Count Fault). The users have been using Xerox colour wax and 3rd party black wax. I saw another topic that mentioned replacing the ink loader. I have done this and it hasn't changed the fault, I have...

Hello, I know that the item in question is a scanner but I was hoping someone maybe able to help me here. I need a parts list for a Panasonic KVS2046C. I have searched all the places I can think of and come up with nothing everytime. Thanks in advance, Chris

Hi, Thanks for the help. We have taken the drum heater out and found that on the left side at the end where the brown material is, has burned slightly. After investigating further we have found that one of the drum heaters we kept from a scrap unit was also starting to go in the same place.

Hello, I have been to see a Phaser 8200 that is giving off a very strong smell. It is causing the users to have headaches, one of the other users eyes started watering when he entered the room. It's also been causing people to choke when in the room. I have smelt the wax melting before and...

Hello, I am currently trying to fix a Phaser 850 that keeps jamming at the paper exit. The paper was not getting past the blue rapid release guide(xerox PN. 650-4153-00) because the transparent part had been creased up when someone had removed a jammed sheet of paper. I have replaced that part...

Hello again, We have managed to fix the original fault and before we found the previous problem we had changed the power supply because the old power supply was faulty. The printer now keeps restarting itself. It gets as far as 80-90% and then restarts. Has anyone got any idea what this could...

Hello, The error 09.005.40 refers to the cyan ink stick being stuck, but we have checked the ink sticks and made sure they are not jammed and that there are no little bits of ink that are not melting in there. Does anyone know why this messege still appears? Also the users have been using 3rd...

Hello, thanks for the help I tried an ink loader from another printer and its continuing to do the same thing, so I think its the printheads. Is there a Strip Down guide for the printer? or can anyone explain how to strip it down? Regards Chris

Hello, I am currently trying to fix a Xerox Textronix Phaser 860DP that is printing all colours properly except black (most of the time its faded and sometimes not there at all). I have tried eliminating light stripes a few times but it has no effect. I also had a look under the ink loader...