Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. avman32107

    No video or Post Beeps on Startup#2

    No overclocking... I'll try taking out the CMOS battery, I have never gotten to see any sort of screen. No video will show, The monitor stays in "check signal" mode.
  2. avman32107

    No video or Post Beeps on Startup#2

    Nowell, Yes I tried that also. No change. I made sure before I powered the mobo initially that all the jumpers were se right for my CPU. Then when it didn't boot I reset the bios. No change.
  3. avman32107

    No video or Post Beeps on Startup#2

    Update... I tried 2 PSUs a 300W and a 350W. Both powered the PSU/CPU fan on. I even tried a PCI video card.
  4. avman32107

    No video or Post Beeps on Startup#2

    Pc-Chips 811LU motherboard AMD 1.4 cpu (266 fsb) 256 ddr266 ram Geforce 2 ti 64meg I get no video post and no beep codes. I tried starting it up on the table and no change. Re-seated the ram and video and cpu. no luck Then I just took the ram and video off and had the pc speaker hooked up and...
  5. avman32107

    No video or Post Beeps on Startup

    Sorry, BadBigBen.
  6. avman32107

    No video or Post Beeps on Startup

    What confusion? My problem is the same as ohif's. I was stating my setup and that I too have "No video or Post Beeps on Startup"
  7. avman32107

    No video or Post Beeps on Startup

    Pc-Chips 811LU motherboard AMD 1.4 cpu (266 fsb) 256 ddr266 ram Geforce 2 ti 64meg I get no video post and no beep codes. I tried starting it up on the table and no change. Re-seated the ram and video and cpu. no luck Then I just took the ram and video off and had the pc speaker hooked up and...

Part and Inventory Search

Back
Top