Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Ciscon

    Hyperterminal messages

    Try Control-P and Control N
  2. Ciscon

    Limited to 10Mb/sec on 1711?

    Do you have any CAT3 cabling? Have you tried replacing the exisiting cable to Cat5 or better. Do u have a drawing of your network?
  3. Ciscon

    Cisco 3600 acting strange

    Can you post your show run?
  4. Ciscon

    Design Question

    You can also invest in iMUX from Verilink or another vendor. They can handle up to 4 t1s if I remeber correctly. Then you connect the Imux to your router via HSSI.
  5. Ciscon

    Cisco WIC-1DSU-T1 line code question.

    Make your self a hard loop, and plug it right off the smart jack. The other side should come up as up/up looped. If you continue to see errors, do the same on the opposite side. If you continue to see errors, then the problem is on the telco's network. If the errors stop then the problem...
  6. Ciscon

    IP Address DHCP to Cox cable modem Question

    I dont remeber the exact command but I think it was something like ip rarp or something like that. I'll look tonight on ym router when I get home.
  7. Ciscon

    Vlaning Scenario

    I found a much simplier solution to my problem. I call it poor man's Vlan. My biggest problem is that I am on 1 subnet, and want to vlan each company off from each other. But some of the servers that I have are common servers. Because of the logistics of this network, reIPing is not a...
  8. Ciscon

    HELP! Can not ping PC on other subnet

    Can you paste us the output of show ip eigrp topology
  9. Ciscon

    How to block telnet??

    Yeah but that will open up snmp, http, finger and other unwanted services too. Just keyword the telnet.
  10. Ciscon

    HELP! Can not ping PC on other subnet

    Just did a little research, and saw that the subnet mask in your eigrp network statement is optional. So if you don't put one in, its going to treat it as a Class A address, 10.0.0.0 255.0.0.0. Try 10.0.0.0 255.255.252.0, or better yet, give us the output of show ip eigrp topology
  11. Ciscon

    HELP! Can not ping PC on other subnet

    If you're using the same default gateway on 10.0.0.X, 10.0.1.X, 10.0.2.X, and 10.0.3.X networks, shouldn't your subnet mask be 255.255.252.0 ?
  12. Ciscon

    Vlaning Scenario

    If I put my servers on a different Vlan, will the servers in the server vlan be able to communicate with the workstations in companyX vlans?
  13. Ciscon

    Vlaning Scenario

    I have 2 Cisco 3550s and have connected them via Gbit. The network environment here is made up of 3 seperate companies, all on 1 subnet using a common set of servers. Example: There are 2 AD servers and 1 File/Print Server for use by all three companies. Then each company has a few...

Part and Inventory Search

Back
Top