Search results for query: *

I am looking at setting up a PIX so that clients using the internet can connect to the outside interface on the PIX using a PPTP VPN (terminated on the PIX itself), and can have their VPN connection IP addresses assigned by a DHCP server on the inside interface. Has anybody got experience of...

I am looking at a number of network monitoring solutions and must thank everybody who responded for their help. Thank you.

Yep we have these as well... vpdn group PPTP-VPDN-GROUP accept dialin pptp vpdn group PPTP-VPDN-GROUP ppp authentication chap vpdn group PPTP-VPDN-GROUP ppp authentication mschap vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto required vpdn group PPTP-VPDN-GROUP client configuration address...

Sorry but the VPN that is being used is PPTP The PIX has the entries:- isakmp enable outside isakmp nat-traversal 20 isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 already defined, so...

There are a number of PC's (all with static IP's) for which we want to monitor the amount of traffic (in MB/GB) that has gone across the PIX. Does anybody know a method for doing this ?

The inside network currently has a number of PC's that have been allocated static IP's and need to communicate via the PIX to the outside to establish a VPN connection with a remote host. Normally we would use dynamic IP address NAT for all of our external comms but this will not work. If we...

After installing Networker on an IBM RS/6000 running AIX V4.3.2 and an attached 5/10GB 8mm tape drive (which is working fine using tar!) and trying to perform the installation test as detailed in the installation manual, we get the error message:- media warning: /dev/rmt0.1 writing : A system...