Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Adding network to catalyst
As described here you cant do that. How can you add a subnet address to a vlan? you can add an ip address to a layer3 interface as secondary, is that what you mean? Regardless, i wouldnt recommend doing that, it is simpler to create another layer3 interface either physical or logical and add... -
VLAN
Just fiddle with your Addressing schema. I am presuming since you are asking this question, you are small office outfit. I doubt you will have any impact in using a larger addressing space. I am also presuming you dont have public addresses assigned to your network nodes, if you are use private... -
Load Balancing and Failover on Perimiter Routers?
I agree with your assessment. For load balancing across two internet connections, outbound, for a small company statics would do fine. But if you are hosting services, you need to look at this from a different angle. Using BGP with 2 different ISP will not however Load Balance, BGP only... -
Trunks 2900 XL switch
sh run is also a good one B-) UnaBomber ccnp mcse2k -
Pix firewall kills outlook
You cant Redirect traffic down the same interface on a PIX, if this is what you mean. As KiscoKid is implying this can be fixed with DNS. You need your inside DNS server to resolve for mail.domain.net to the internal IP address of your email server, and the outside DNS server to resolve to the... -
Load Balancing and Failover on Perimiter Routers?
Dont know what to say to you, if you dont bother to read links I post, then I am unsure how on earth I am going to *prove* something to you. Anyway I will attempt to theorise a concept for you, but you could just prove this to yourself on a router... Are you aware that you can create 2 Static... -
-
3500 switch vtp domain
Hmm isnt the Vlan DataBase becoming defunct by Cisco? I wonder which IOS he is using UnaBomber ccnp mcse2k -
Load Balancing and Failover on Perimiter Routers?
IIRC = If I Recall Correctly http://www.tek-tips.com/faqs.cfm?fid=387 http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt2/1cfindep.htm#wp1025915 Static routes will install 6 parallel routes to a destination, you can change it using the maximum-paths maximum... -
NTP to Windows 2000 Server
Why doesnt this surprise me? /bash UnaBomber ccnp mcse2k -
Help me better understand DLCI
The DLCI's are Locally significant, so no thats not correct, the DLCI locally refers to the PVC, which is the map between the 2 DTE devices... At the other end, a different dlci may map the same PVC UnaBomber ccnp mcse2k- UnaBomber
- Post #4
- Forum: Data Transmission general discussion
-
Load Balancing and Failover on Perimiter Routers?
Yeap, you could do that, you can also load share across equal paths with static routes IIRC. Anyway he needs load balancing inbound sessions, which is a whole different thing, BGP is the way forward, and yes you will have to get your Telco involved UnaBomber ccnp mcse2k -
Out of Order packets
Not usual, unless your ISP is brown-outing, or your packets are all taking different routes... You say the telnet session is dropped, but is the tunnel broke? UnaBomber ccnp mcse2k -
-
access rules
Are you talking about access lists on the firewall? By the way you would get a quicker response if you posted in the PIX section on this board.. http://www.netcraftsmen.net/welcher/papers/pix02.html http://www.cisco.com/warp/public/110/23.html UnaBomber ccnp mcse2k -
Base Cisco 2801 - QOS?
yeap, the 2800 series supports QoS, including the 2801 I believe http://www.cisco.com/en/US/products/ps5854/products_data_sheet0900aecd8016fa68.html UnaBomber ccnp mcse2k -
Load Balancing and Failover on Perimiter Routers?
Yes its possible, Is this for a WAN configuration, to another Site, or just for access to the WWW (multi-homed)? If WWW you can use BGP or static floating routes If WAN you can use HSRP and track a tunnel to another IP address on the other side of the WAN. Both will give you redundancy and... -
NAT translations won't work
ohh shoot :) yeap Ip nat inside source static x.x.x.x y.y.y.y where y.y.y.y is the destination address and it gets nated to x.x.x.x, thus y is global x is local <--- engage brain first UnaBomber ccnp mcse2k -
NAT translations won't work
Its the wrong way round. You need to nat to structure your nat statement like this: ip nat inside source static Global_IP Local_IP This will mean that a destination IP of Global_IP will be nated to Local_IP. UnaBomber ccnp mcse2k -
VLAN within a VLAN?
Tagging refers to dot1q as it tags frames rather than encapsulating them for vlan Identifiers UnaBomber ccnp mcse2k
