Search results for query: *

Hi, Just a thought check the GPO as to what setting is disabled i.e computer or user. MCSA

Hi, No problem glad to help. Mike MCSA

Hi, Try a program called Profwiz.exe http://www.forensit.com/Profwiz/index.htm Mike MCSA

Hi, You said for ruture reference was there a way, under the above you can set the way windows deals with a system failure. If you want to try to recover your existing you will have to get the Sata Drivers for your Drive and boot into recovery console. I have had this happen many times in the...

Hi, Under System Properties, advanced TAB, select settings on Startup and Recovery. Mike MCSA

Note sure what the command is but try running a CHKDSK from within recovery console. Regards Mike MCSA

Hi, Have you checked: 1) The server has a static IP Set with correct Subnet. 2) You have activated the scope/and authorised the DHCP. 3) If you run NETDIAG on server from CMD prompt it might give you an indication of where the problem is. (Note: you need admin tools installed to run NETDIAG)...

Might be worth running chkdsk from the reovery console incase there are errors on the drive. MCSA

How many users have you got?? Under Active Directory users and Computers if you select all the users, then right click and select properties. Select the ACCOUNT tab and tick users must change their password at next logon. MCSA

Generally in the past any time I have had a HDD reporting incorrect size in the BIOS the drive has been beyond repair, I would suggest a new drive. MCSA

Its out I have it installed, so far so good. MCSA

Is the HDD SATA in the Laptop?? MCSA

Just wondering you state the size is showing as 128GB inside of windows, what does it state from the BIOS? MCSA

Hi, Have you tried using the net use command to try to map a connection to serverA.

Whats the make and model of the Graphics Card and Network Card?? Have you tried www.driverguide.com dont bother registering as username is drivers and password is all. Michael

Outlook 97 will disconnect automatically after sending and receiving, the only problem is is that i have norton anti virus 2003 installed and the internet connection is terminated before the email can be sent. With the copy of outlook 97 i installed on my system i was able to turn off this by...

Thanks for all the assistance have tried all of your suggestions but it will still only register as an XP2000+?????

Any body know of any good Scandisk programs for Windows XP??? Thanks

The mother board supports up to 400 FSB the Chip is 333mhz FSB, but in the BIOS the maxium I can set is 233 FSB.

I have recently built a new PC using Nvidia Nforce 2 Mother Board and an AMD Athlon XP2600+, however it is only registering as an Athlon XP2000+. I have upgraded BIOS to version 5.2 the latest available. Manual for Mother Board states that it will support up to athlon XP3000+ Any suggestions...