I have just had the pc from hell with similar problems. In the end, I disconnected the reset switch from the mobo and it has been up and running now for over 18 hours. It might be worth a try.
Hi all, I think I might have solved the problem. I disconnected the reset switch from the mobo and it has been up and running for 18hrs. There must be either an intermittant short on the reset switch or the switch is too finely set i.e just about making all the time.
Thanks for all your...
I have reset the bios by removing the battery and shorting out two pins as directed by the manual. This should reset all the bios settings to the default including the RTC.It did not improve the situation. I am going to try a P4 2.4 proc and see if that helps. The Ram is ddr2100. All fans are...
Hi 777Ziggorat,
It is definatly not overheating. I have physically felt the heatsink on the cpu and it is cold. I have also tried different sticks of ram and in different slots. I have also just replaced the graphics card with an older PCI card and still the same problems.
Any suggestions?
the Psu is a new 350w(replace twice). I have tried all the various components on a working pc and they operate normally. The mobo has been replaced as well. The only thing I have not replaced is the graphics card and the HDD.
Hi This is the 2nd time I am posting this request for help as there were no responses last time. Is there anyone out there who can help?
My Pc Specs:
Asus P4B266 MoBo
Celeron 2.0Ghz Cpu
256Mb ram DDr
Ati 128 Rage pro Agp card
Initially on putting the pc together, it ran well. Approx. 6 hours...
Hi all, this is the 2nd time I am posting this request for help as there were no responses last time. Is there anyone out there who can help?
My Pc Specs:
Asus P4B266 MoBo
Celeron 2.0Ghz Cpu
256Mb ram DDr
Ati 128 Rage pro Agp card
Initially on putting the pc together, it ran well. Approx. 6...
I think what hw45 is referring to is called "Disk drive overlay" software or DDo software. Also check your jumpers on the back of the drive. Some drives have a jumper for "master with slave present" if this is enabled and there is no slave there it may have problems picking...
When you installed the new Hdd, was it to replace the old drive? If so, Have you reinstalled the OS onto the new drive along with the USB drivers from the MoBo install disk?
If the Onboard drivers have not been installed it may cause the Usb not to function.
My Pc Specs:
Asus P4B266 MoBo
Celeron 2.0Ghz Cpu
256Mb ram DDr
Ati 128 Rage pro Agp card
Initially on putting the pc together, it ran well. Approx. 6 hours later, it rebooted itself, and hung on the post test. I tried replacing the power supply, the ram, re-seating the graphics card, Moved the...
Hi Franklin 97355,
When I say "shuts down" The power supply fan is still running, but it appears as if everything else has stopped, although the HDD Led stays permanently lit. When this happens, neither the reset switch nor the power off button respond. I have taken off all power...
I have just built a celeron 2Ghz pc, 20gb HDD, Cd/Rw and 512 Mb ddr Ram.
I have loaded win2k onto it. All went well for about 2 days. The pc then started shutting itself down even though there was no activity on it, sometimes within an hour, sometimes only after about 8 hours.
It also takes 3...
I have just built a celeron 2Ghz pc. I have loaded win2k onto it. All went well for about 2 days. The pc then started shutting itself down even though there was no activity on it, sometimes within an hour, sometimes only after about 8 hours. It also takes 3 or 4 attempts to reboot it, sometimes...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.