Search results for query: *

Hi Everyone, I'm trying setup a remote Unix box to get a copy of the ASA running config once a week. I've been able to do this with the below command: scp admin@<ASA IP>:config.txt . The problem I have is that before I can run this command I have to run: copy running-config disk0:config.txt...

Thanks Brent, that's fantastic. Cheers, Peter.

Hi Guys, I’m setting up a ASA 5510 and I’m using the LOCAL database for authentication seeing there are only 5 users and because the customer does not have a AAA server, but the problem is that the VPN users are able to log into the ASA via ssh seeing they have an account on the Local ASA user...

Oppp's sorry, wrong forum, just reposted in ASA

Hi Guys, I’m setting up a ASA 5510 and I’m using the LOCAL database for authentication seeing there are only 5 users and because the customer does not have a AAA server, but the problem is that the VPN users are able to log into the ASA via ssh seeing they have an account on the Local ASA user...

Thanks CiscoGuy :)

Which CCNA Track? Hi Everyone, I’m sorry if this question has been asked a thousand times before but I’m hoping someone can help. I got my CCNA about 4-5 years ago and it has now expired, I have just made the decision to get my CCNP/CCSP so I now have to get my CCNA again, from checking out...

Seeing that you are using Raptor 6.5 I think you have one of two options. 1. Upgrade. Raptor 6.5 is very old software now and I think it would be in your best interest to upgrade, even if it is only to ver 7.04. 2. Disable the SMTPD and create a custom protocol for port 25 (GSP or TCPAP-GSP)...

Great question, By default the SGS will alert with a 516 Alert message if the CPU Temperature is to low/high. The normal range is between 0° to 80 so if the SGS goes above or below this temperature it will send an alert to the log file. So if you want to receive a notification eg: email, page...

If you are talking about a VNC server and IIS server on the same machine that you have installed the Symantec VPN Client on then I am betting that it is going to be the VPN Client Firewall that is blocking the connection. If this is the case then I think you should check out the below Symantec...

Try the following KB from Symantec, it has more to do with DNSD, but in the past it has helped with this error message for other proxies like HTTPD and FTPD...

Routing could be the problem, check your DNS domain setting to make sure that they are point to the correct public IP that the traffic should be coming back out of. As for the VPN check to make sure that you have setup the "Dynamic Key" to bind to the correct "WAN Port" and only use that Wan...

If you can paste a copy of the logs that include the error message it will help me help you. Cheers, SefLogic tips on fixing any problem in the world 1. Check google / google-groups 2. check the vendor support page 3. get a book on the topic

This is not an easy task seeing it is FTP and FTP uses its funky ports. I am working through this one with the SGS 2.0 and am having a few issues with the PORT command. But as for the SEF 7 just follow the below KB from Symantec and you should be good to go...

I see this error everyday, the VPN tunnel is failing on the Phase 1 ID. This is because the 200/R is being NATed behind the modem. To resolve the problem, try the following. For the "Local Security Gateway" I am assuming that you have the "ID Type" set to "IP Address" and you have a blank...

Signal 11 errors are 95% of the time due to port conflicts, the first thing you should do is check the gsp.cf file to make sure that there are no ports that could be causing a conflict with some proxy ports. Below I have added some links that should help you resolve the issue...

This error is due to a mismatch in the Client -> 200/R VPN, 90% of the time it is the Phase 1 ID / pre-shared keys. Make sure you follow the below document to the letter and you will be able to get your VPN up and running again. Go to the symantec support site and search for the following KB...

What are the Dr Watson errors? If you can paste a copy of the errors I might be able to work out what happened. SefLogic tips on fixing any problem in the world 1. Check google / google-groups 2. check the vendor support page 3. get a book on the topic

Checkout the following KB: 2001120710593854 from the Symantec support site. Below is a cut and paste of the KB. Error: "Can't initialize Emapi" Situation: When you attempt to launch RaptorMobile, you see the error message "Can't initialize Emapi". Solution: This error can be caused by one of...

This KB will fix your problem, This was a well known issue when Symantec went from 6.5 to 7 Get the following KB from the Symantec support site and all of your problems will be over. 2003060615342554 If this does not work check out my FAQ on this site that talks about the disabling the kernel...