Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tstormchaser

    Can't get multipathing to take hold

    Problem solved. Sun came in and found that, although the HBA cards installed in the 4600 and 2200 were in a box labeled as revision 02, they were in fact revision 01. Once the cards were replaced the system starting working properly.
  2. tstormchaser

    Can't get multipathing to take hold

    I have set up a system with a Storedge 2530 array. It is attached with 2 HBAs to an X2200 and 2 HBAs to an X4600 server. Both systems are running Solaris 10 05/08 release. I have configured volumes on the array using the CAM (common array manager) software provided by SUN. I have mapped...
  3. tstormchaser

    Disk array messing up boot

    I have a Sun x4600 server. Added a SCSI card and connected a Storedge 3320 disk array (JBOD). Once connected, Solaris 10 is trying to boot using any of the disks in the array. My operating system is on the 4600. When I add only one bank of disks (6 disks) it boots fine. When I add the...
  4. tstormchaser

    Can 2 servers share the same disk?

    I have 2 independant X4600 servers that will both be plugged into a 3320 disk array containing 10 disks. Can the 4600s share a disk or do I need to isolate the disks, 5 for one machine and 5 for the other machine? Thanks in advance.
  5. tstormchaser

    How would I change server name?

    This is on a Unix machine running Solaris 7. I could do it using vi but that takes a while and we are going to be constantly changing the name of the machine so I'd like to script it so it can be done quickly each time. Thanks
  6. tstormchaser

    How would I change server name?

    Hello all, I'm trying to create a script (with virtually no scripting experience) to convert the /etc/hosts file to reflect a new name for the server. Any ideas on how to go about doing that? Any info would be much appreciated. Thanks.
  7. tstormchaser

    metadb question

    We have a Sun E5500 server that uses two D1000 disk arrays, each holding 6 disks for a total of 24 disks on the system. Whenver you go into the metadevices and type ./metadb you get a list of all of the metadb in sequential order. We put the metadb on slice 7 of each disk so when you do a...
  8. tstormchaser

    IE not loading any pages

    Got my parents a laptop for Xmas. Emachine running XP home. I loaded up all the latest Microsoft stuff up to and including Service Pak 2. They are using Verizon DSL with a wireless router connecting to this laptop. When they boot the laptop up it shows a good wireless connection and they...
  9. tstormchaser

    What happens if I don't use a backup slice on disk?

    I am trying to design a disk format for a new system. We are planning on mirroring the disks. I want to free up one of the partitions on each disk to use for other things. I'm wondering what are the ramifications of not having the backup slice on the disk?
  10. tstormchaser

    Is there a way to go from 9GB to 36gb using disksuite?

    I'm trying to upgrade an E5500 server that has two disk arrays(12 disks in each) that are 9gb disks. We want to replace 9gb disks with 36gb disks. I know that disksuite has limitations because it will copy over the 9gb to the 36gb disk but leave the other 27gb as unused and unavailable. Does...
  11. tstormchaser

    Can't access certain websites

    Solved it. Found out that you have to go into the WAN settings on the router and change the MTU to a lower default setting. It was set to 1500. Changed that to 1452 (as suggested by Dlink) and that solved the problem.
  12. tstormchaser

    Ip address problem

    I recently set up a wireless network with a DL-514 router and I'm using a DWL-650 wireless card. This is on a laptop with XP pro installed. I went through all the instructions that came with the box and set up everything the way they said to. My wireless network shows that it's got a strong...
  13. tstormchaser

    DHCP give me bad ip address

    I recently set up a wireless network with a DL-514 router and I'm using a DWL-650 wireless card. This is on a laptop with XP pro installed. I went through all the instructions that came with the box and set up everything the way they said to. My wireless network shows that it's got a strong...
  14. tstormchaser

    Can't access certain websites

    Just got my wireless network up and running. I can't seem to get to certain website while wireless. For example I can get to Yahoo but not Yahoo mail. If I plug in the Ethernet line into my laptop I get there fine but not on wireless. I read a previous thread and downloaded Windows XP Pro...
  15. tstormchaser

    Can't seem to kill a process

    I've got a process running on the server that opens a display on a workstation. From time to time, this process will get hung, eat up a ton of CPU usage, and I'm never able to kill it. I tried rebooting the workstation, no dice. Logged into the server as root and did a kill -9 on the process...
  16. tstormchaser

    Average CPU utilization

    Thanks a million Vlad. You've solved a problem I've been trying to fix for weeks. I used to have to compile all those stats by hand but not anymore. Thanks also to Salem for the input. Paul
  17. tstormchaser

    Average CPU utilization

    Thanks Vlad and Salem. You guys are a real lifesaver. The file in question looks like below. I have tried to set up a script to pull out utilizations for the SVR CPU, WKS CPU, SVR memory, etc.. So far I always get the value produced in the first search put into all the other utilization...
  18. tstormchaser

    Average CPU utilization

    Vlad, Thanks for the help. My other problem with this is that I need to do this only for SVR CPU utilization but it is embedded in a file with many other CPU and Memory utilizations so just searching for a % will not work well. Thanks for the help.
  19. tstormchaser

    Average CPU utilization

    I have a file called 24HourSummary.txt. I'm trying to create a script to stop at the SVR CPU utilization and add up all the 15 minute averages to come up with a daily average. Any help would be greatly appreciated. Portion of file is below. SVR CPU utilization: Device: System...

Part and Inventory Search

Back
Top