a friend of mine asked me to look at his system to see if i could program it for ringing over the paging system at night i can set up the button for uda and it doesnt work after reading what docs hes got it says the trunks have to be programmed for UDA i can get into the programming port with my...
where in winspm do i go to set the timer lower so that it picks up the shorter calls since they are calling then hanging up i dont think the smdr would show it.
is there someway using spm to log all calls besides the smdr feature that would show all the calls being made from each ext. someone is pissed off and calling 911 and hanging up
i set the trunk grp to intercept to ext 112 and after several rings it goes to ext 100 dont know why this is happening but need to find out why i had to dil the line 9 and 10 to the ext for it to work forward busy no answer is set to 165 which is the first voice mail port it works when i dil the...
whats the easiest way to move the 100dcd card if its not in use would it be better to delete the programming for the card then remove it and reboot the system. thanks again.
i have a two cabinet magix system that has the following
POWER SUPPLY IS A 491E1
slot 0 processor CKE5
slot 1 412 LS-TDL
slot 2 412 LS-TDL
slot 3 024 TDL
slot 4 016 TRR
slot 5 100D/CSU/DSU-U
CARRIER 2
POWER SUPPLY IS A 491D1
slot 6 Merlin Msg
slot 7 024 TDL
slot 8 412 LS-TDL
slot 9...
is there a way to program a button with the access code so that it dosent show when they press it that way i could program the buttons on the phones that need paging. (personal speed dialing or something like that)
first i want to thank everyone for all their help.
Is there anyway to keep station users from using the page feature in a class of service or something like that. the paging is going out over #9840 to a bogen ut1312 zone controller thaks guys again for all the help.
ive been reading the manuals but cant quite get it through my pea brain how to assign a button for using a trunk to page any help would greatly appreciated
is there anyway to see the logs from anyother phone besides the Lowest Jack. the only info i found says the info is displayed on the lowest number jack.
i cant find any info on programming this add-on card and or any documentation for it anyone have a copy that i cant use or can someone direct me to a site
after i added two cards and renumbered them and changed group coverage etc. do i need to do a backup in order to keep the changes in case of a power failure or do the changes get saved when i exit the programming.
im connected using winspm release 9.0 and am trying to find out how to print out general trunk info and cant find it. they now want me to add new trunks for increased capability i keep reading the manuals but not real clear for me. thanks to everyone on my other post the stations work fine. i...
no card was in that slot before. everything seems to work ok ive tried hooking up a phone and it works on both cards is there a way to change the ext numbers one at a time so that some can be in the 3000 range thanks again
should i do a backup to the memory card and to a file again?
the system error im getting is as follows
System Errors
Slots Not Equal
Slot 8 Port 00
i installed two 412 tdl sl/id cards in slots 8 and 9 and now this is the only error i have. any ideas for me. im connecting the amps and blocks now will check back later thanks again for all your help.
i did what you said and it worked the only thing now is that slot 8 has errors and alarms on it slot 9 is fine im going back this morning so that i can check it out and hook up the amps and blocks for the connections. any suggestions on checking the alarms im using Winspam ver 9 and cant find...
i did as you suggested and when i powered up the system everything came up fine when i used winspm to check the system inventory is says the boards are in surrrgote mode anyone have any ideas as to what that means i dont have the manuals with me i know what a dummy but i will have to come back...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.