Search results for query: *

I have recently installed a small 6100 and the customer wants to use codes to identify the types of call he is receiving.From all the documentaion I can find, it seems to be "account codes" but I cannot find if these are to be added on the 3300 or the 6100 config. If its on the 6100 then the...

We are trying to set up teleworking but are having audio problems.The 6000/6010 sits in the DMZ behind the Customers firewall. We suspected a port issue, so have opened up all ports to and from the 6000 to allow all IP.We've upgraded the TW blade to 3.2, and the ICP its registering to is at...

Hi this may not be of much use to you, but I have the same problem with a 3com office connect wireless router.My company use "checkpoint secure remote", and I have tried the same settings as you describe. Stangely enough, I also have to log on to a customer's site from the same laptop using...

I have recently purchased a 3com ADSL wireless 11g router. I can access the internet using my company laptop using the wireless USB adaptor, and also connect if using the wired lan port. The problem is I cannot connect to our Corporate Lan (we use checkpoint secure remote). Other people I work...

Hi I have had ongoing problems using a BT LES100 cct for VOIP. After resolving many QoS issues both on the PBX gatekeeper cards, and the Customers data network, I still get problems with cut off, and echo, with calls over the LES100. We have been allocated 10% of the bandwidth, and are using...

Md110 should do the job. Minumum release of BC11 if you want VOIP. (BC12 if you want IP trunks).Md will work to Call Manager using a Cass link, and you will only require 3 device cards for phones, if you're not going VOIP locally. Access is possible over the network using the NIU card for moves...

Hi I have had ongoing problems using a BT LES100 cct for VOIP. After resolving many QoS issues both on the PBX gatekeeper cards, and the Customers data network, I still get problems with cut off, and echo, with calls over the LES100. We have been allocated 10% of the bandwidth, and are using...

Hi Kings1 The reason for "command lost" is due to software corruption, either in GHHS3, or in GPP. Its usually just a question of following the linking through GPP, but it needs indepth knowledge of SACOP'ing the relevent records. Can you print individual groups? If you can, its likely...