Search results for query: *

Hi everyone, according to Health & Safety guidelines, I believe that the reasonable temperature should be between 18 - 27 degrees Celsius. Check out this link ---> http://www.tgwu.org.uk/Templates/Internal.asp?NodeID=89314 In regards to your pregnant colleague, a note from the doctor...

Hi, you will need to make sure you are running the following PCL Driver:- Ver V.60.051.645 or a Commercial Slim Driver. You cannot use a PS Driver, or Citrix's Host Based Drivers. Hope this helps. Kevin

Afternoon all! I have noticed that our when we have an attachment which is coming in or going out through our MimeSweeper, and attachment which is normally 9Mb increases in size to anything up to 13Mb! Does anyone know what the problem is with this, or why this is occurring? Cheers Kevin

Thanks balage0. In addition to this, once we have the users logging into the desktop, what would be the best way to present the applications available to the user, without putting all the icons on the desktop? I am from the fat client/network neighbourhood side, and have little experience of...

They are Wyse WT1200LE terminals.

Hi everyone - apologies in advance if this has already been covered, but I could not find it! I am about to start working on an environment which heavily uses Wyse Terminals, and published desktops, and they want to go to PS4. I am used to standard desktops and PN, so I would like to know if...

Yes, I have got the control set to Applications. After I have selected the Programs list, when I click on the applications field the correct Applications from the Table are listed, but it is just getting the field to accept the selection of the entry I want by clicking on it. Kevin

famehrie, I have just checked and everything is inputted as you described,but is does not work. When I had applications as a list box, even when I have clicked on the correct application from the list, if I then go to another record, and then back again, the application is not selected. It is...

I have tried that, and when you click on the down arrow, it displays the items correctly, but as soon as you click on the item you want, the box closes up again, but still displays the original item at the top of the list! I am going to have another look in case I have made a boo-boo!, and I...

Famehrie, that works great except for one small thing. In the frmSoftware form, when I click on the Applications field, the list appears perfectly, but no matter which one I select, it will always display the first entry in the list. Any ideas? Kevin

Thanks famehrie - I will give this a shot over the weekend and report back! You are a star, so you get a star! Kevin

Thanks famehrie, that sounds like a great help! Looking forward to seeing what you can come up with! Kevin

Hi, just a quick question. Does anynoe know if it is possible to use Access to look at a users Calendar on an Exchange 5.5 server? I would like to have a calendar page, which looks up four engineers calendars, and then publishes for the month specified a vertical list from day 1 for each...

Hi everyone. I'm a bit weak on access, but perhaps someone out there can help: I have a table called SR, which has a field call PROGRAM (which looks at a table called PROGRAM, and a field called APPLICATION (which looks at a table called APPLICATION). Program holds the main titles e.g...

We have an MSA1000, with 2 controllers and 2/8 Fabric Switch. Had to have the controllers replaced as they were faulty, but now we are experiencing an issue with upgrading the firmware, getting the following error messages:- SAN1-switch1:admin> firmwaredownload Server Name or IP Address...

The XML Service is running on TCP 8080, if this helps. Kevin

We have the following config:- ISA Server with external address 195.152.isa.isa over https(internal 172.16.isa.isa) Citrix Server with internal 172.16.ctx.ctx (alternate set to 195.152.isa.isa) ISA has the following set:- TCP 1494 Out TCP 8080 Out TCP 1023 In UDP 1604 Send/Receive Web...

Anyone help?

Just to update:- The account which does work in our Active Directory I have duplicated, but called a different name. So it has exactly the same credentials, membership access and location in the Active Directory. Tried to log into this using Nfuse, and it does not work. Can anyone advise me...

I am experiencing an issue with Nfuse, and need some help. Have NFuse Box & CSG Box in DMZ. STA next to Citrix Farm in internal network. Certificates installed for https access only. Some domain accounts can log in, but some can't. No error messages, just a re-display of the login box for the...