Search results for query: *

Thanks - I knew it must be possible. Your a star! CB

We are working on an application for security web cameras. When you enter these for the first time you are asked for a username/password. Does anyone know if there is a way of entering the combination at the same time as the URL? So that the username/password box is completed automatically...

Hi, In that case and assuming that the remote end is a router of some type then the answer is just to add the ISDN router on your LAN and set up a static route to the receiving router. You will need the address of the system you are going to connect to or its URL. Your routing table should be...

You found the answer yourself... but the official answer is YES!

Hi, Don't set both ends to PPP Multilink as they will both try and establish a second channel, this causes a fatal embrace. Cheers CB

Hi, Check that the two computers can communicate with each other first before blaming PcAnywhere. Remember you still have to set up a routing system for this to happen? The fact that you have connected to the Internet is not necessarily enough. Have you established a PPP session...

Hi, This is almost certainly a PPP issue. Check that the TA is set for PPP access and that the 801 is set to accept a PPP session. CB

Hi, Where are you trying to connect? I suspect that this is to do with V110/V120/x.25 incompatibility? Or your PPP settings, some ISP need different PPP settings. CB

Hi, Could really do with more information to help with this? Is the ISDN connecting to an ISP or to join two LANS together? CB

I have a Linux (Redhat) server this has two NICs local LAN and WAN. I can access users FTP areas remotely fine through the WAN NIC. But when I try and access the same FTP upload areas through the 192.*.*.* network (local) I get rejected with a 10054 warning. This is not at the FTP connect...

Go on - give us a clue - where do I find or get this? Sorry:: Linux I know - Windows I am a dummy.... does it show?

Is it the BT or Tiscali? Firstly neither recommend that you do not do VPN due to the Latency. With the help of the groundstation we did get this to work but only when they temporarily switched us through a different network - they did it just to prove a point- that it can work. Secondly if it...

Sorry for the late response but I have been away... My problem is that I have an application that I need to run automatically on power up of the machine. I added it to the startup but I have a login box that has to be responded to when the machine starts- even if its just to "cancel&quot...

Sorry about the late reply... Did you get a fix? It seems to me that it could be that the remote end is set for voice only. Not voice and data.

Hi, In Europe we dial out on one number and receive on the other using MSN (Multi Subscriber Numbering). ISDN has two independent channels. To do this in the US you need to ask your supplier to set up a different number on each of the B channels. We did this at a trade show in the US last...

Does anyone know how to get Windows 98SE to autoboot? We need an application to run automatically as soon as power is applied to a PC. Without intervention of an operator. CB

Just wanted to say that I did get this sorted with Mike's help, anyone else with the same or similar problem please contact me. I have a large source of information that I am trying to get into a useable form. It does work.... so don't panic too much if yours does not come together straight...

Hi, That helped a lot. We can now talk to our main router firewall but we still cannot get out? We can get to the main routers internal http page and by setting up static routes, here FVS318, we can even talk to our HTTP servers on the internal LAN remotely. Can you explain how you set up...

I have linked two LANS together through ISDN..... 192.168.1.x and 192.168.0.x I can Ping but I cannot access http on servers on either network? Do I need to port forward? If so how do I do this on the 775? These are IP based security cameras, you can http into them to see live images and in...

I have a similar problem...did you get it solved? CB