Search results for query: *

Ok, I think I found my problem I believe it is a duplex mismatch that causes this problem though I am facing a dillema. The 2610 is set to full-duplex and the interface is 10MB. The 2950 switch of course has all 10/100 ports and the port the 2610 is plugged into is on auto detect and detects it...

Hello, I have a 2610 as the local LAN router plugged into a switch. There is also a MPLS 2820 Cisco router plugged into the switch. I also have a PIX 501 plugged into the switch with inside int as 192.168.2.253 and a tunnel out. The e0/0 of the 2610 is 192.168.2.254 and the fa0/0 int of the...

Hi global, I tried using those static routers and networks destined for the 192.168.0.0 network such as the 3.0 network still go out RouterC whereas I want to force it to Router B. I put in ip route 0.0.0.0 0.0.0.0 192.168.101.253 5 ip route 0.0.0.0 0.0.0.0 192.168.101.1 15 and packets...

Hello globalchicken or anyone else willing to help, Here are my configs from my lab environment 2610 (production is the 3560) version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname RouterA ! no...

Hi globalchicken, Thanks for your response. Can you give me some sample configs on your proposal above or at least the commands to lead me the right way? Thanks, Jimmy K

Hi Viper, Thanks for the doc. I tried a few things from it and not getting good results but maybe I am doing something wrong. Helpdeskdan, if you dont mind maybe giving me an idea on how to configure load balancing? Thanks, Jimmy K

Hello all, I have a branch office with a 3560 as its main LAN router. All traffic is told from this router to go out a 2610 over a 1.5MB line. Their is a backup line running off a MPLS 2820 router via a 1.5MB line as well. All 3 of these routers are running EIGRP. My problem is since both lines...

Hello all, Ok, draw this out if you can as it is not that complex. I have a hub (Chicago) site and a spoke (Los Angeles) site. Chicago consists of a VPN 3020 Concentrator, a 7204, and a 3560 Layer2/3 switch. LA has a 2610 2820, and a PIX 501 on one network all plugged into one switch. There is...

I would like to thank all who helped assist me getting this going. I made each router in its AS and each router is routing across the core BGP Router F. Thanks, Jimmy

Hi jneiberger, My original post included just a basic set up of what I wanted to get me in the direction I want to go but I guess going that way is not going to help me without detailed facts. Here is exactly what I am facing. I have 4 routers and have included configs. I have routers setup...

Thanks jneiberger, though I did advertise each serial int on each router, for some reason I can only ping from A to C and not C to B. I am trying to have both local e0/0 ping each other. I check the sh ip route and I do not see on C that it has learned the network 192.168.1.0 network from A. Johnny

Thanks for the tip guys, though I put no synchronization on all 3 routers and made sure ip classless was enabled as opposed to no ip classless and it is still not work. Router A cannot ping router C. In other words, Routers A and C are not advertising their networks across. Of course Router B...

Hello, Can someone please help with basic BGP setup with 3 routers? I have Router A, B, and C. B is in the middle of A and C. I would like to have Routers A and C be in one AS and Router B in another AS. What simple commands do you need to get this going? I have the BGP process started and I...