Search results for query: *

Does it matter which of the two SATA ports that you plug your hardrive into? My motherboard has two one is marked 0 and the other 1.I am only installing one drive,no raid..

Thank you very much for your help.Yes one module was purchased retail and other from kingston..Thank you for taking the time and answering my question..

the question is are these two different part numbers on memory modules are different but they appear to work,are they compatible?

I Have a gigabyte motherboard,K8NS.At frys purchased it with 256 memory kingston KVR400/256R..Two days ago I ordered from kingston 512 of memory to add used there memory look up program,now the memory I recieved was KVR400X64C3A/512..I installed it and it seems to be working nd was added up...

We have to computers both running win2kpro,set my computer ,manage,users,guest to enabled.My computer is the first on network,when browseing the network his computer name comes up but when i click it it says access denied,but on sons computer i can browse my computer.also when in stalling...

Yes my first amd chip,I have setting in the bios set to 200 but with in windows it says the chip is runnig at 1600 mhz so i thought there was a problem with a setting,and yes im runnig ddr 400. Excuse my stupidity,thank you very much.

trying to set up a sempron 2800 socket 754 on a gigabyte motherboard it has an adjustable cpu clock frequency were should these settingz be??? im confused between FSB and cpu clock freq

A stupid question but what is the major differences between xp pro and xp home?? Does one use less system resorces?

Just did a clean install of xp pro,have a 3 boot system w\ win98se\win2k\xp pro\ the dvd-rom drive wont read a dvd movie or a data dvd but will in 2k and 98,whats up its listed as a compaq dvd-rom sr-8587,anybody run into this before

I have a compaq presario 700 notebook running winxp,haven't used it in a couple of months but when I went to boot it it came up with cmos has no date and needed to be set and it said cmos checksum error after settig the dates in the bios it booted up normally but after setting for a couple of...

ok I want to print out a doc. that looks like this. Date Time Hrng Type Nat A# Client Name Case Type Jud etc etc etc etc etc 1 bob smith etc etc bo all the way done the page,I would like to keep all this info in office,poss outlook to print,but I have...

Im using file maker pro to set and print court calenders but i would like to use office 2k so i could use my outlook calender. Is this possible?

I dont know if this is the right forum so maybe you can point me in the rihgt one. My problem is I have File Maker Pro that I use,but Id like to use office 2k,is their a program in office that is about the same??

I need to set up my hardware monitor in the bios,does anyone no the cut off temp for a pentium 4 533 fsb.It seems to run at 112 F. normally.

Will games and apps run under ntfs or not,im getting conflicting info. Seadooman

Im getting ready to put together a new computer and am wondering if a system with only 1 operating system would benefit from multiple partitions?? The computer i use now has 6 w\ 3 operating systems,new 1 80 gig harddrive. thank you for your thoughts

DOS is fine.650 mhz,64 megs ram,i have a desktop running xp w\ 366 mhz,160 megs ram and its alot faster.

working on a toshiba satellite notebook that was given too me.had win98 took 5min to boot formatted and installed win 2k,found to be slow,mouse trails ,slow to respond,check system info/conflicts it lists=video card=modem=card bus=ethernet card=pci audio=pci-usb,all on irq 11,could this be a...

I have set up my home with a belkin router to share an internet connnection and a printer no problem,but my office im setting up a linksys 5 port router w\ a dsl connection the isp says i have to have 5 ip addresses,im lost,i have the modem plugged into the router the router going to a 4 port...

I want to connect to my computer at my office using remote desktop in xp but my work computer is on a router sharing with 3 other computers how do i do this? Is it as simple as the ip address of the router then the name of the computer im trying to reach?