Hello Guys,
Anyone ever heard about NBAR ?? I want to get something like protocol distribution via snmp. Can not find where it is located in the MIB, and not sure how to get it out.
Thanks in advance,
Preeda
We don't have ip unnumbered. The interface that I am talking about is serial 0. In this case, the line protocol still up, but can not ping the remote router not until enable keepalive. Again we are running HDLC between these 2 routers.
Thanks,
Preeda
Hello all,
I found no service single-slot-reload-enable in my 3660 router. Is this mean that I can reload at particular module ?? I have enable this service already, just don't know how to use it.
Thanks,
Preeda
Dear all,
I have two routers, A and B connected running HDLC protocol. The problem is that from router A I can not ping router B, eventhrough interface and line protocol up at sh int command.There is no ACL setting to both routers.
I was told by carrier to enable keepalive at router A Later...
Hello guys !
Does anyone know an easy way how to burst the traffic using ping from cisco router or dos to verifty, if my network can really burst to the bandwidht that I got from carrier ?
Thanks a lot
Preeda
Thank you so much for fast response,
1) How can I get the bug finder ? Is it free ?
2) Which debug parameter I should turn on in this situation ?, and what comand will bring the debug output to syslog server ? I am familiar with only debugging X.X.X.X, which bring the log output to systlog...
Hello all,
I have consistense problem with my 3600 router. This router support ~300 ATM (I am working in the Bank). Around once a month the router will down with unidentified reason. I show process cpu, it runs around 10%, and free mem at 34 M, while the problem still exist. I guess, I have...
Hello all,
As some of you may remember that I used to post the issue about ISDN backup.
The method that I normally do is by removing the backup interface BRI0 at the main link (serial0)
The question rise, when I issue command "sh ip route". The question are as following.
1) The...
Hello I3stuff, Erick,
As you can see from my config. We use rip instead of static, since we have around 500 branches to manage. The problem, we are facing is for some branch ISDN doen't make a call after mainlink down. Not until we ask someone there to shut the mainlink completely.
Thanks,
Preeda
Hello Erik,
Thanks a lot for your response. Here is our config, that we are using. If I understand it correctly, backup delay 60 120 means to let router wait for 60s before making a call after main link down. When the mainlink comes up wait another 120s to disconect ISDN line.
By the way...
Hello all,
Now, our branch offices use Cisco router 2521 lease line using frame relay protocol and analog modem for dial back up. Recently, we are trying to migrate to ISDN back up, and we found some difficulty with ISDN as following. I am basic user, so probably some of you can suggest me the...
Thank you so much for your response.
I have one more question, when I still keep my current config which is frame relay encapsulation as following, line protocol will shown down(looped). But, when I write erase, and let the router use default hdlc encapsulation and keepalive turn on. Line...
Hello,
Now, I have ten 2521 routers returned from branch office, and I need to confirm, whether all the port still function properly. Can anyone here please recommend me, how to test it ??
I used to connect back to back with another router, and test for individual port, but now I have 10 of...
Hi guys,
This morning I have some problem with Router 3660 IOS 12.0 router, and I need to reboot it.
The problem is that, sh log command does give me only the log after it reboot. Before that has gone !! Any command to to make router keep the log in NVRAM or any suggestion on this will be a...
Just want to add some more. In case, you ping from the command promp. Use ping -n [x], when you want to ping x packets. Ping and enter, you will find many options that you can do.
Hi, I am very new to cisco router. My company use OSPF protocol as the main link, and RIP2 for back up link. I really don't understand, when someone said redistribue Rip into OSPF, or in reverse. Can any one help me out. Thanks in advance.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.