Search results for query: *

/etc/init.d/nagios start will start it if the config files validate correctly.

It looks like something trying to remove carraige returns CR octal 015 from a file. Don't feel confident that it would work though

The problem solving .. Guidie is indeed a book. Have you a Diagnostics CD? try running diags against the card that is seemingly reporting the problem. Otherwise try to start the system with the Ethernet card removed. Bear in mind it may be a card (hardware) fault, a driver fault, or a...

Display Value 777 Explanation Progress indicator. A 10/100 Mbps PCI Ethernet device driver is being identified or configured. System Action The configuration method is being run. If an irrecoverable error occurs, the system halts. User Action If the system halts with this value, go to...

Thanks for the pointers, I got it going ok with a suse 7.0 install, I think I might swap the processors and disks with my other AP500 that runs windows and install Linux on the other one which has not had any such problems before, and windows on this one. Must just be the chip version being...

Hi I am getting a sci timeout whenever I try to boot my compaq AP500 into Linux(SuSE 8.1). The system passes diags, installs ok on the same drive, controller etc. I have tried swapping cables and used another disk but not getting anywhere. Ahve also reflashed the bios on the AP500. Also tried...

In the crash output from above > trace -k STACK TRACE: 0x2ff3b400 (excpt=edffff54:40000000:00001004:edffff54:00000106) (intpri=0) IAR: .remove_e_list+38 (00032888): tweqi r7,0x0 The "tweqi" instruction is what took the system down, The "t*" instructions...

You may just need to load the cpqarray module to be able to see the disks.

Clearing the NVRAM won't do it, the array controller reads the config info from the disks themselves, thats how you can completely swap one set of drives for another and have different environments. When you delete the array though, off the disk, well it will be gone for good along with the...

Hi Had smart-2DH with 2 mirrored pairs of disks added new disk what was logical drive 0 is now logical drive 1 and 1 is now 2 and new disk got 0 This has really messed with my linux booting :( , any ideas how to get logical drive numbering back. Have deleted logical drive from new drive...