Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Nyiks
  • Order by date
  1. Nyiks

    Dialup to a Cisco BRI

    I have a Xircom Creditcard Isdn adapter and I cannot dial into a Cisco 1603 router. I can get as far as being authenticated and then the router drops the call PLEEZ HELP Nyiks in Cape Town
  2. Nyiks

    Voice over ip via Cisco Wireless AP and Bridges

    Thanx for your response , I appreciate . The type of atenna you are talking about is Yagi
  3. Nyiks

    I need a config for a Nortel passp

    I need a config for a Nortel passport configured for voice prioritisation. I have used Site Manager before but I am not a fundi on Nortel products Thanx Nyiks
  4. Nyiks

    Voice over ip via Cisco Wireless AP and Bridges

    Heita Daar Gents & Ladies I have two sites connected wirelessly with Cisco Wireless Ap and Bridge and I also have 2 cisco Ata 186 . I need to know if I can run voice over the wireless link and if Cisco Wireless products do pass voice traffic
  5. Nyiks

    Voice over ip via Cisco Wireless AP and Bridges

    Heita Daar Gents & Ladies I have two sites connected wirelessly with Cisco Wireless Ap and Bridge and I also have 2 cisco Ata 186 . I need to know if I can run voice over the wireless and if Cisco Wireless products do pass voice traffic
  6. Nyiks

    Pix 501 Stati IP Configuration

    ip address inside 10.1.1.1 255.255.255.0 Regards Nyiks & Co
  7. Nyiks

    PIX 506E - DMZ

    If you want to go DMZ rather go for a PIX515 Firewall , PIX 506 supports only 2 interfaces but you can still put your Mailserver on the inside interface Good luck
  8. Nyiks

    Adding Fast Eth adapter to a 3640

    Try this firmware version , I had the same problem at this sorted it out c3640-d-mz.121-2.T.bin Good luck and I hope it not too late
  9. Nyiks

    Trouble getting from dmz to internal on PIX 515E

    static (inside,dmz) 192.168.3.4 192.168.3.4 netmask 255.255.255.255 conduit permit tcp host 192.168.3.4 eq 21 host 192.168.2.2 These command worked for me because I had the same situation as you , I hope this is not too late Regards 123Series

Part and Inventory Search

Back
Top