Search results for query: *

Thanks a great deal! (Especially DanielMark above!) Thought I was lost with the backup I had prior to my laptop being stolen, and didn't want to spend >$300 to get my data. A wonderful utility ntbkup.exe! Here's the command line entry that worked for me (same as above). Make sure you do a...

Go to the Toolchest, "System", "System Manager", select "Security and Access Control", and then select "Configure Auto Login". Disable the setting. Also do a man autologin, and read up! Enjoy! ::-) Genius begins great works, LABOR ALONE finishes...

Solved my issue! Turned out to be a poor switch connection. I could ping packet sizes up to 330 bytes, but lost them after going higher. This is why browsing didn't work, but ping and nslookup did (very small default packet size). Try forcing a higher packet size. UNIX: ping -s 1500...

Solution Found! Network switch issue! Moved to 100/Full card from 10/Half switch. See thread link in above post. Chris ::-) Genius begins great works, LABOR ALONE finishes them. - Joseph Joubert

SOLUTION - Network switch issue! Problem: Connected to 10 Mbs/Half Duplex. Diagnosis: Hooked up local 4 port Cisco Router, tried to duplicate failure. No problems. (at 10 Mbs / Half). Solution: Moved cube port connection from 10 Mbs/Half switch to 100 Mbs/Full card in network cable closet...

Some more info - determined today that I can't ping a packet size past 325 bytes without losing packets. Pinging my localhost is OK up to and past 1500 bytes. When I then set the MTU of my interface to 325, I can get some web browsing, but most times the pages stall. I think this may be a...

I have this same behaviour on a Unix (SGI IRIX 6.5) system. Can ping locally and within my intranet (by name or by IP), have correct gateway, DNS servers, proxy, etc. but can't access the internet. Any help would be appreciated! ::-) (check out thread59-355968 for details) Genius begins...

I'm sure you both have tried this already, but make sure the tape device is powered on before starting your system. My SGI autodetects / mounts the tape once inserted, but it does not detect it if the drive is powered off on startup. I've also had luck with inserting a known good tape in the...

I am behind a corporate firewall, I DO have my proxy set up correctly in Netscape, but can't browse my local OR external web sites. I can ping (and nslookup) local machines and others on the LAN; firewall prevents pinging (and nslookup) outside of intranet. Running SGI IRIX (unix - SVR4 based)...

Pardon the length - I'm trying to give all the info...[hourglass] Octane w/6.5.16f IRIX, corporate LAN behind firewall. In order to utilize this SGI, I had to move this system (it had been idle - shutdown) from another room to my desk, and also get a new IP address from our IT dept. due to a...