Search results for query: *

You have not said what subnet mask is being used. Looking at the config I guess its 24 bits, 255.255.255.0. Check this is configured correctly on all devices and that your PC default gateway is set to 10.0.1.1. Once the packet hits the router a ping should work ok, as this network 10.0.0.0 is...

802.11b is based around 2.4Ghz 802.11g is based around 5Ghz. Cisco uses a RP-TNC connector (Reverse-Polarity Threaded Naval Connector.) You will need to check documentation on the new kit to see if compatible. The Cisco antenna / dish are different part numbers depending on whether they are...

Hello, My experience is only with Cisco products. See www.cisco.com for lots of info - no need to have an account. 1) I believe in the UK there are 13 channels ... However, to avoid interference you can only use 4 simultaneously. 2) The channel can be set manually or can be set to search for...

Login to the router. Enter enable mode >Conf t type >write erase type >reload If you are promted to save config select NO.

Hi, From the console you should see what you are typing. Obviously in Rommon there are only a few commands you can actually enter. If nothing is being echoed back check your hyperterminal settings.

Hello again, The debug o/p is a bit odd - the refid shows as 0.0.0.0 - should be the SNTP server address. Also, the years seem strange. Router is March 1993, Server is December 2002, The timestamps : ref, org and rec all show Jan 1990 !!!!! I would try manually setting the clock. Could it be...

Load splashing noise heard ....

Hello, What ios are you running, I think you need the plus version for SNTP. If all else fails do a set clock :)