Search results for query: *

Power can be gotten from a Shumway Brothers set up or from NORTEL power packs. If using the Shumway set up, signal to pair 1 or pins 4 and 5 and the power to pins 2 and 7 on RJ-45 type outlet or pin 1 & 6 for 6 conductor RJ-11

Look at your key code sheet. The ISM parameters and any additional packages will be listed there. Also listed is the other information you are asking about. Something like 6 choices after your New Install choice. Once this is all entered it will ask if this is correct. Then enter the key...

Look at your trunk programming. If it has a PRDN, then it has been set up as a private route. Also in LD 16 look at your routes to see what has been programmed to be Private lines.

You use either a small plug is power power pack that attaches to the line cord or a Shumway transformer/power pack and bring power in on pin 1 and 6

If your trunks are analog then you generally do not get caller ID on Nortel equip unless you have a front end CLID but still not on Nortel sets. If digital trunks you shoud get it as long as LEC sends CLID info.

WHAT KIND OF SYSTEM? IF IT IS MERIDIAN 1 THEN YOU WILL NEED ALAW IN LD 17 PARM AND IN LD 17 FOR INT COMPANDING OR THE VOICE MAIL WILL SOUND SUPER BAD IF YOU CAN HEAR IT AT ALL. IF YOU ARE ALREADY USING MU LAW I WOULD CONTINUE TO DO SO. WITHIN YOUR SYSTEM YOU WOULD BE FINE AND LET THE TRUNKING...

Null modem adapter to TTY port 0 use hyper term to PC's Comm port 1 set to 9600, 8, none and 1 should work like a champ

1. Are you an American citizen? 2. No you currently hold or have held a security clearance? 3. If so, and you are willing to travel (a lot) overseas, check with Splice-Co, Inc. (205) 884-1117 talk with Jimmy Morris or Frank Finch.

No LD, just completely power down the system or the Core/Network modules and power back up. See if that does you any good.

Sorry, sysload is pwer down the processors then power back up. Several places in manuals it says to re- INI reinitialize, but several cases a "sysload" does better. Do you have back up floppies in your system? Good sysload should get all your programming input from these

Not in that area, but out fit that travels a lot in Alabama.SPLICE-CO, Inc 1-800-245-6821 or (205)884-1117 Have done installations all over US for FAA and military and overseas work also.

No battery back up or a UPS? I would suggest a sysload, power down the processor and power up again check results. Good Luck.

LD 22 to print for 17. either prt cfn or look for keycode/ISM parameters in ld 22 for max agents

Is your system an Option 11C? Using the Entopia cad for slot 10? If so after you hit the switch and log in, AX should get you to Meridian Mail, once completed with mail and you Log Off Mail be sure to do a (CNTRL) and right bracket ] then you should be back into the switch. If using a larger...

I would use a Xut trk card and set up a paging route for it. Probably similar to what you have done with COT card. Check your books for paging stuff in Feature Guides.

hfa is correct but remember that now key 6 becomes handsfree, if they had a function there before it is going to go away

E-mail me aND I WILL SEND A FULL BLOWN DESCRIPTION OF SETTING AUTHORIAZATION CODES, MY EMAIL IS mikentip7@aol.com

If you have the books look under LD 135 and 137, strongly suggest you also do a LD 43 data dump before you INI your switch.

Under LD 18 build your speed call lists. You can build 100 at a time. Then for each phone in the system that you want to, assign a Speed call number and make them a speed call controller. On the multiline set do a chg then for key x scc xxxx let the individual users build their own speed...

Or you can disable LD 30 from your midnight routines. In LD 17 for OVLY x30 and system will not do untt test and disable an unplugged digital phone.