Search results for query: *

Hello, We have a client-server tool installed in Windows 2003 server. This is an enterprise tool and the database used is flatfile system. What we have noticed that suddenly, some of the files goes missing in the database. They are deleted from the database. We have used Auditing feature which...

Hello, I have a CISCO PIX 506E. I use it as a VPN to get connected to the remote site at my customer's place. This device is in control of my customer. The typical problem i am facing is this : I wanted to change a router in the network in which the PIX is present. After changing the router, I...

Power Management is not ON. I forgot to mention this. The problem reported is not for the entire scope of 250 IPs. It happens randomly for some IPs and the problem is intermittent. Regards Jagdish

Hi Markdmac, Thanks for your inputs : 1. Workstations are configured to register the IP address with the DNS server. 2. The DHCP scope options pushes out only internal DNS server addresses and not ISP DNS server addresses. Hi lhuegele, Thanks for your inputs. DNS scavanging is turned on...

Hi, Our Setup consists of a Windows2003 Server acting as a DC. We have a DHCP server running on it. Quite often, we have seen that the IP addressess leased by the server are not updated on the server. Due to this, we have issues with our home grown tool (which sends notes to pc based on the IP...

Hi, Thanks for the inputs. Currently we are unable to invest on L3 Switch. Hence, we may have to postpone the purchase I cannot extend the existing scope without deleting it and creating a fresh one. But this is risky since the subnet will be down for sometime. This is not acceptable by my...

The range is 255 and subnet mask in each is 255.255.254.0

Hi, We have a router (1700). I was trying to enable netflow for this. I tried reading ALL the possible documents that CISCO had provided on the web. But was not able to even see the option "flow". The IOS is 12.2 ANy help in this regard is appreciable. Thanks in advance Jagdish

Hi, We have a Windows2003 Server acting as a DHCP Server with the address 192.168.0.1 to 190.168.0.255. The same is also acting as a DNS Sever for IPs 192.168.1.1 to 192.168.1.255. We were running out of IP for DHCP. Hence we created another scope 192.168.2.x in DHCP. When we connected another...

I have a DC with Win2K. It has DNS and WINS configured. The clients are win 9x distributed over various workgroups. Everything was working fine. Suddenly, from one of the workgroups (say X), the clients are not able to browse the network neighbourhood. I tried to change the workgroup to Y. It...

Any type of attachements. In fact I tried sending a simple doc file to myself. It just vanished into the black hole...

Hi, I have MSOutlook 2000 installed. I have a problem. I am not getting any mail which is having attachements. I tried to send a mail to myself from the same profile with a attachment. Even then, I am not able to get it. The mail however is visible in the sent items. There is no problem...

Hi, We have a network Printer (HPlaserjet 2200). It is connected to a node directly. NT serves as a PDC. We have configured the driver on all the clients (Win9X) in a peer-peer mode so that the Server doesnot get burdened. We have yet another Network Printer (HP Laserjet 2100) which is...

Hi, I am facing problem in the backup. We have a Windows NT acting as a PDC with the clients (users) putting their data as a backup. HP Sure Store drive is connected to the NT machine for the backup. We use the 40Gb DAT tape for the media. We also have a CVS server (on Linux). We wanted to take...

Hi, Let me also add few points about StarOffice 5.2 We have a major headache in the office. Couple of them use Staroffice and rest use Office 2000. We need to create lot of Quality documents with numbering. We are facing problems in those. When the document is opened in Office 2000, all the...

I have a 450 MHz Intel CPU with 128 MB RAM. There are 4 Com-ports. (2 on the mother-borard and two on the Super IDE Cards). The OS is dual boot (Win 95 & Win 2000 Prof). I have a strange problem. When I start the PC, after I logon to the network, if I click on any application, it takes minimum...

Thanks for the speedy reply. In the installation of HPLaser jet 2100, there is no version control. Where do I check it ?

We have an NT acting as a PDC. There is a network Printer serviced by the PDC. There is a WIN 9x CLient on which WIN 2K Prof also has been installed (Dual Boot). When I try printing from WIN 9X, the printing is proper. But when I try from 2K, I get Japanese/Korean (?) text. The test print works...

We have a NT as a PDC. We have couple of WIN 2000 Prof. on the network. Though these are getting connected, but the problem is from Win 9x clients, I can just see the PC in the Network Neighbourhood. If I try to access any folder, I get Access denied message. I tried building a trust...